For the 2002 model year, the Honda CD 50 Benly motorcycle has a listed dry weight of 167.6 lb (76 kg).
Honda CD 50 Benly weight overview
This is a genuinely light bike. That usually makes parking, pushing it around a garage and catching small low-speed balance errors easier than on larger motorcycles. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Very Light Motorcycle
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Honda CD 50 Benly weight & related specs
| Model years covered | 2002 |
|---|---|
| Dry weight | 167.6 lb (76 kg) |
| Engine displacement | 49 cc |
| Torque | 3 lb-ft (4.1 Nm) |
| Fuel capacity | 1.59 US gal (6 L) |
| Full-tank fuel weight (estimated) | 9.9 lb (4.5 kg) |
Useful weight calculations
| Torque per 100 lb | 1.8 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.29 cc / lb |
| Weight per 100 cc | 341.9 lb / 100 cc |
| Fuel weight as % of bike weight | 5.9% |
| Weight with full tank | 177.4 lb (80.5 kg) |
What the weight numbers tell you
Honda CD 50 Benly weight FAQ
How much does the Honda CD 50 Benly weigh?
The source data gives 167.6 lb (76 kg) as dry weight. A fueled, road-ready bike will weigh more than this figure.
What does a full tank of gas weigh on the Honda CD 50 Benly?
A full tank works out to about 9.9 lb (4.5 kg) from the listed 1.59 US gal (6 L) capacity. Actual fuel density varies slightly, so treat it as a practical estimate.
What does the Honda CD 50 Benly weigh with a 180 lb rider?
The approximate combined total is 347.6 lb (157.6 kg) with a 180 lb rider, based on the representative dry weight used on this page.
How much heavier will the Honda CD 50 Benly be than its dry weight?
Do not treat dry weight as curb weight. Adding the listed fuel capacity alone produces roughly 177.4 lb (80.5 kg); the true ready-to-ride figure can still differ because dry-weight definitions vary.
What does the Honda CD 50 Benly weigh with a full tank?
Based on the available dry-weight and tank-capacity data, a full-tank estimate is 177.4 lb (80.5 kg). Oil, coolant and market-specific equipment can still make actual ready-to-ride weight different.
How much torque does the Honda CD 50 Benly have per 100 lb?
Available data gives 1.8 lb-ft per 100 lb. That ratio helps explain how strong the engine is relative to the bike’s mass, especially at lower speeds.
What is the Honda CD 50 Benly displacement per pound?
The model has about 0.29 cc per lb in the available data. This simply shows how much engine displacement there is for each pound of motorcycle weight.
Is the Honda CD 50 Benly easy to move around by hand?
By scale weight it is light, so backing up, garage movement and slow-speed corrections should require less effort than on heavier bikes. Geometry still matters.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.