For the 2023 model year, the Honda MW 110 Benly motorcycle has a listed dry weight of 257.9 lb (117 kg).
Honda MW 110 Benly weight overview
This sits in a fairly light weight range. That does not guarantee easy handling, but it reduces the sheer mass you have to manage at a stop. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Light Motorcycle
How heavy is the Honda MW 110 Benly?
dry weight
Using a model-level dry weight comparison, the Honda MW 110 Benly is lighter than about 81% of 166 Honda motorcycles with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Honda MW 110 Benly weight & related specs
| Model years covered | 2023 |
|---|---|
| Dry weight | 257.9 lb (117 kg) |
| Engine displacement | 108 cc |
| Torque | 6.3 lb-ft (8.6 Nm) |
| Fuel capacity | 2.64 US gal (10 L) |
| Full-tank fuel weight (estimated) | 16.4 lb (7.5 kg) |
Useful weight calculations
| Torque per 100 lb | 2.46 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.42 cc / lb |
| Weight per 100 cc | 238.8 lb / 100 cc |
| Fuel weight as % of bike weight | 6.4% |
| Weight with full tank | 274.4 lb (124.5 kg) |
What the weight numbers tell you
Honda MW 110 Benly weight FAQ
How heavy is the Honda MW 110 Benly?
Listed dry weight is 257.9 lb (117 kg). Because no usable wet/running figure was supplied, treat that as a lower starting point rather than the exact on-road weight.
Is the Honda MW 110 Benly heavy compared with other Honda motorcycles?
It is on the lighter side in this dataset. Its representative dry weight sits around the 19th weight percentile among 166 Honda motorcycles, meaning most compatible models are heavier.
How much does the Honda MW 110 Benly fuel weigh?
The listed tank capacity is 2.64 US gal (10 L). Using approximately 0.745 kg/L gasoline, a full tank is roughly 16.4 lb (7.5 kg). That is an estimate for fuel mass, not an official Honda curb-weight calculation.
How heavy is the Honda MW 110 Benly with an average-size rider?
A 180 lb rider brings the simple bike-plus-rider total to roughly 437.9 lb (198.6 kg) using the representative dry figure. Gear and luggage would add more.
Can I treat the Honda MW 110 Benly dry weight as curb weight?
No. The usable figure is dry weight, so it excludes at least some operating fluids. Dry weight plus the estimated full fuel load is about 274.4 lb (124.5 kg), and oil/coolant or definition differences may add more.
What is the Honda MW 110 Benly full-tank weight estimate?
Using the listed dry weight plus the calculated fuel mass, the estimated weight with a full tank is 274.4 lb (124.5 kg). That still may not equal official curb weight because dry-weight definitions can exclude other fluids or equipment.
What is the Honda MW 110 Benly torque per 100 lb of bike weight?
The calculated torque-to-weight range is 2.46 lb-ft per 100 lb. It is useful for comparing bikes with very different overall weights.
How many cc does the Honda MW 110 Benly have per pound?
Engine displacement relative to bike weight is 0.42 cc per lb. It can help compare motorcycles from very different displacement classes without relying on cc alone.
How does the Honda MW 110 Benly compare with the median Honda motorcycle weight?
The model sits about 135.6 lb (61.5 kg) lighter than the compatible median Honda motorcycle weight used on this page.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.