Across the 2013 and 2015 model years, the Honda Benly Pro motorcycle has a listed dry weight of 233.7 lb (106 kg).
Honda Benly Pro weight overview
Its low overall mass should be most noticeable off the throttle: moving it by hand, backing out of a parking space and managing stop-start riding should take less effort than on a heavy road bike. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Very Light Motorcycle
How heavy is the Honda Benly Pro?
dry weight
Using a model-level dry weight comparison, the Honda Benly Pro is lighter than about 58.6% of 70 Honda scooters with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Honda Benly Pro weight & related specs
| Model years covered | 2013, 2015 |
|---|---|
| Dry weight | 233.7 lb (106 kg) |
| Engine displacement | 49 cc |
| Power | 3.8 hp |
| Torque | 2.6 lb-ft (3.5 Nm) |
| Fuel capacity | 2.64 US gal (10 L) |
| Full-tank fuel weight (estimated) | 16.4 lb (7.5 kg) |
Weight changes by model year
Useful weight calculations
| Horsepower per 100 lb | 1.63 hp / 100 lb |
|---|---|
| Pounds per horsepower | 61.5 lb / hp |
| Torque per 100 lb | 1.1 lb-ft / 100 lb |
| Displacement per pound | 0.21 cc / lb |
| Weight per 100 cc | 476.9 lb / 100 cc |
| Fuel weight as % of bike weight | 7% |
| Weight with full tank | 250.1 lb (113.5 kg) |
What the weight numbers tell you
Honda Benly Pro weight FAQ
What is the Honda Benly Pro dry weight?
The available dry weight is 233.7 lb (106 kg). Actual ready-to-ride weight will be higher after fuel and operating fluids are added.
Is the Honda Benly Pro lighter or heavier than other Honda scooters?
Weight is broadly typical for the category, landing around the 41st percentile in this model-level Honda comparison.
Which Honda Benly Pro years have different weight specs?
No clear weight change appears in the usable model-year data. Other specifications may still differ by year.
How much does a full tank add to the Honda Benly Pro?
Based on the supplied 2.64 US gal (10 L) tank capacity, the gasoline itself weighs about 16.4 lb (7.5 kg) when full. This helps explain part of the difference between dry and ready-to-ride mass.
What is the combined Honda Benly Pro and rider weight?
Using the model’s representative dry weight and a 180 lb rider, the combined bike-and-rider mass is about 413.7 lb (187.6 kg) before riding gear, luggage or a passenger.
What is the Honda Benly Pro power-to-weight ratio?
Available model-year data produces 1.63 hp per 100 lb. It shows engine output relative to motorcycle mass rather than just quoting peak horsepower. That places it around the 5th percentile within the compatible Honda scooter power-to-weight comparison.
Is the listed Honda Benly Pro weight ready to ride?
The published usable figure is dry, not curb weight. A simple dry-plus-full-fuel estimate is 250.1 lb (113.5 kg), but that still is not a substitute for an official wet/curb specification.
What is the estimated Honda Benly Pro weight with a full tank of gas?
Filling the listed tank brings the calculated bike weight to roughly 250.1 lb (113.5 kg). This estimate is most useful when no official wet/running figure is available.
How much of the Honda Benly Pro total weight comes from fuel?
The calculated full-tank fuel mass is about 7% of the bike’s listed weight. This helps show why a dry-weight number can understate what you actually manage on the road.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.