The Honda Benly 110 Pro motorcycle specifications include a 107 cc (6.53 cu in) engine, an automatic gearbox, and a listed weight of 113 kg (249.1 lb).
Key specifications
The 2013 model is treated as the standard specification. Only later model years with a different supplied value are shown below.
How the Honda Benly 110 Pro compares
This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.
About 81% lower than the Honda database average. Around the 8th percentile across Honda models.
About 9% lower than the Honda database average. Around the 18th percentile across Honda models.
About 26% smaller than the Honda database average. Around the 33rd percentile across Honda models.
Honda database percentile rankings
Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.
107 cc — larger displacement than about 8% of Honda models.
710 mm — taller than about 18% of Honda models.
10 L — larger than about 33% of Honda fuel tanks in this database.
Dimensions compared with Honda average
Each measurement is compared with the average value across Honda models where that dimension is available.
1,805
2,078
13% below average.
700
827
15% below average.
1,040
1,161
10% below average.
1,280
1,431
11% below average.
710
780
9% below average.
115
184
37% below average.
Mechanical overview
Additional useful specifications
| Front tire size | 90/90-12 |
|---|---|
| Rear tire size | 110/80-10 |
| Front tire width | 90 mm |
| Front tire aspect ratio | 90% |
| Front rim diameter | 12 in |
| Rear tire width | 110 mm |
| Rear tire aspect ratio | 80% |
| Rear rim diameter | 10 in |
| Engine oil capacity | 1.00 L (1.06 US qt) |
| Estimated theoretical fuel range | 529 km |
| Bore/stroke ratio | 0.91:1 (Undersquare) |
Engine specifications
| Engine type | Single cylinder, four-stroke |
|---|---|
| Displacement | 107 cc (6.53 cu in) |
| Torque | 8.6 Nm (0.9 kgf-m or 6.3 ft.lbs) @ 5,000 rpm |
| Bore × stroke | 50.0 x 55 mm (2.0 x 2.2 inches) |
| Compression ratio | 10.1:1 |
| Cooling system | Air |
| Fuel system | Injection. PGM-FI |
| Fuel control | Overhead Cams (OHC) |
| Ignition | Full-transistor battery ignition |
| Starter | Electric & kick |
| Oil capacity | 1.00 L (1.06 US qt) |
Transmission and drivetrain
| Gearbox | Automatic |
|---|---|
| Final drive | Belt (final drive) |
| Clutch | dry multi-plate shoe |
Chassis and suspension
| Frame | Underbone |
|---|---|
| Front suspension | Telescopic fork |
| Rear suspension | Unit swing type |
Brakes, wheels and tires
| Front brakes | Expanding brake (drum brake) |
|---|---|
| Rear brakes | Expanding brake (drum brake) |
| Front tire | 90/90-12 |
| Rear tire | 110/80-10 |
Dimensions and weight
| Dry weight | 113 kg (249.1 lb) |
|---|---|
| Seat height | 710 mm (28.0 inches) |
| Overall length | 1,805 mm (71.1 inches) |
| Overall width | 700 mm (27.6 inches) |
| Overall height | 1,040 mm (40.9 inches) |
| Wheelbase | 1,280 mm (50.4 inches) |
| Ground clearance | 115 mm (4.5 inches) |
Fuel and emissions
| Fuel capacity | 10.00 L (2.64 US gal) |
|---|---|
| Fuel consumption | 1.89 L/100 km (52.9 km/l or 124.46 mpg) |
| Greenhouse gases | 43.8 CO 2 g/km. (CO2 – Carbon dioxide emission) |
Performance
| Power/weight ratio | 0.0688 hp/kg |
|---|
Other specifications
| Color options | White/gray, black |
|---|---|
| Seat | Two person seat |
| Comments | Sold in some Asian countries. |
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.