Across 9 covered model years from 1999 to 2010, the Harley-Davidson FLHT Electra Glide Standard motorcycle has supplied wet/running weights ranging from 772.1 lb (350.2 kg) to 789 lb (357.9 kg) and dry weights ranging from 738.1 lb (334.8 kg) to 782.6 lb (355 kg), depending on model year.
Harley-Davidson FLHT Electra Glide Standard weight overview
This sits in heavyweight territory. Riders should think about garage movement, backing up, surface slope and passenger/luggage load as much as the on-road feel.
Very Heavy Motorcycle
How heavy is the Harley-Davidson FLHT Electra Glide Standard?
wet weight
Using a model-level wet weight comparison, the Harley-Davidson FLHT Electra Glide Standard is heavier than about 81.9% of 108 Harley-Davidson motorcycles with compatible weight data.
Dry vs ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Harley-Davidson FLHT Electra Glide Standard weight & related specs
| Model years covered | 1999, 2000, 2002, 2003, 2006, 2007, 2008, 2009, 2010 |
|---|---|
| Wet / running weight | 772.1 lb (350.2 kg) to 789 lb (357.9 kg) |
| Dry weight | 738.1 lb (334.8 kg) to 782.6 lb (355 kg) |
| Engine displacement | 1,442.2 cc to 1,584 cc |
| Torque | 81.1 lb-ft (110 Nm) to 96.6 lb-ft (131 Nm) |
| Fuel capacity | 4.97 US gal (18.8 L) to 6 US gal (22.71 L) |
| Full-tank fuel weight (estimated) | 30.9 lb (14 kg) to 37.3 lb (16.9 kg) |
Weight changes by model year
The 1999 model is used as the baseline where data is available. Only later supplied values that differ are shown below. A year pill does not mean every individual weight field was supplied for that year.
Useful weight calculations
| Torque per 100 lb | 10.67 lb-ft / 100 lb to 12.35 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 1.83 cc / lb to 2.04 cc / lb |
| Weight per 100 cc | 49.1 lb / 100 cc to 54.7 lb / 100 cc |
| Fuel weight as % of bike weight | 4% to 4.8% |
| Weight with full tank | 769.2 lb (348.9 kg) to 819.9 lb (371.9 kg) |
What the weight numbers tell you
Harley-Davidson FLHT Electra Glide Standard weight FAQ
What does the Harley-Davidson FLHT Electra Glide Standard weigh ready to ride?
The supplied figures span 772.1 lb (350.2 kg) to 789 lb (357.9 kg) for wet/running weight and 738.1 lb (334.8 kg) to 782.6 lb (355 kg) for dry weight across the years in this page. Wet weight is the better guide to what you actually manage on the road.
Is the Harley-Davidson FLHT Electra Glide Standard heavy compared with other Harley-Davidson motorcycles?
Relatively speaking, it is on the heavier side. The model sits near the 82nd weight percentile in its Harley-Davidson category, so it is heavier than most of the compatible comparison set.
Does the Harley-Davidson FLHT Electra Glide Standard weight change by model year?
Not every covered year uses the same figure. The page groups identical values together and lists the later model years where the supplied weight specification changes.
How much does the Harley-Davidson FLHT Electra Glide Standard fuel weigh?
The listed tank capacity is 4.97 US gal (18.8 L) to 6 US gal (22.71 L). Using approximately 0.745 kg/L gasoline, a full tank is roughly 30.9 lb (14 kg) to 37.3 lb (16.9 kg). That is an estimate for fuel mass, not an official Harley-Davidson curb-weight calculation.
How heavy is the Harley-Davidson FLHT Electra Glide Standard with an average-size rider?
A 180 lb rider brings the simple bike-plus-rider total to roughly 960 lb (435.4 kg) using the representative wet/running figure. Gear and luggage would add more.
How much heavier is the Harley-Davidson FLHT Electra Glide Standard with a full tank?
Using the listed dry weight plus the calculated fuel mass, the estimated weight with a full tank is 769.2 lb (348.9 kg) to 819.9 lb (371.9 kg). That still may not equal official curb weight because dry-weight definitions can exclude other fluids or equipment.
What is the Harley-Davidson FLHT Electra Glide Standard dry-to-wet weight difference?
The supplied model-year data shows roughly 31.1 lb (14.1 kg) to 37 lb (16.8 kg) between dry and wet/running weight. The exact gap can vary by year and by the manufacturer’s weight definition.
What is the Harley-Davidson FLHT Electra Glide Standard torque per 100 lb of bike weight?
The calculated torque-to-weight range is 10.67 lb-ft per 100 lb to 12.35 lb-ft per 100 lb. It is useful for comparing bikes with very different overall weights.
How many cc does the Harley-Davidson FLHT Electra Glide Standard have per pound?
Engine displacement relative to bike weight is 1.83 cc per lb to 2.04 cc per lb. It can help compare motorcycles from very different displacement classes without relying on cc alone.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Harley-Davidson website.