Honda Benly Weight (231lb)

Quick answer

Across the 2013, 2015 and 2022 model years, the Honda Benly motorcycle has supplied dry weights ranging from 231.5 lb (105 kg) to 255.7 lb (116 kg).

Dry weight231.5 lb (105 kg) to 255.7 lb (116 kg)
Fuel capacity2.64 US gal (10 L)
Full tank fuel weight16.4 lb (7.5 kg)
Power / 100 lb3.05 hp / 100 lb
Model years covered
201320152022

Honda Benly weight overview

WHAT THIS MEANS

This is a genuinely light bike. That usually makes parking, pushing it around a garage and catching small low-speed balance errors easier than on larger motorcycles. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.

Very Light Motorcycle

CATEGORY WEIGHT POSITION

How heavy is the Honda Benly?

dry weight

Using a model-level dry weight comparison, the Honda Benly is lighter than about 62.1% of 70 Honda scooters with compatible weight data.

LighterTypicalHeavier
231.5 lb (105 kg)
70 Honda scootersMedian: 264.6 lb (120 kg)
WEIGHT VISUAL

Dry weight range

Dry weight231.5 lb (105 kg) – 255.7 lb (116 kg)
REAL-WORLD LOAD

Bike + rider total weight

These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.

150 lb rider381.5 lb (173 kg)bike + rider • bike is 60.7% of total mass
180 lb rider411.5 lb (186.6 kg)bike + rider • bike is 56.3% of total mass
210 lb rider441.5 lb (200.3 kg)bike + rider • bike is 52.4% of total mass

Honda Benly weight & related specs

Model years covered 2013, 2015, 2022
Dry weight 231.5 lb (105 kg) to 255.7 lb (116 kg)
Engine displacement 49 cc to 108 cc
Power 7.8 hp
Torque 2.6 lb-ft (3.5 Nm) to 6.3 lb-ft (8.6 Nm)
Fuel capacity 2.64 US gal (10 L)
Full-tank fuel weight (estimated) 16.4 lb (7.5 kg)

Weight changes by model year

The 2013 model is used as the baseline where data is available. Only later supplied values that differ are shown below. A year pill does not mean every individual weight field was supplied for that year.

Dry weight
2022255.7 lb (116 kg)
Torque
20226.3 lb-ft (8.6 Nm)

Useful weight calculations

Horsepower per 100 lb 3.05 hp / 100 lb
Pounds per horsepower 32.79 lb / hp
Torque per 100 lb 1.12 lb-ft / 100 lb to 2.48 lb-ft / 100 lb
Displacement per pound 0.21 cc / lb to 0.42 cc / lb
Weight per 100 cc 236.8 lb / 100 cc to 472.4 lb / 100 cc
Fuel weight as % of bike weight 6.4% to 7.1%
Weight with full tank 247.9 lb (112.5 kg) to 272.2 lb (123.5 kg)

What the weight numbers tell you

Using a model-level dry weight comparison, the Honda Benly is lighter than about 62.1% of 70 Honda scooters with compatible weight data.
A full tank is not weightless: the 2.64 US gal (10 L) listed capacity works out to approximately 16.4 lb (7.5 kg) of gasoline. This is an estimate rather than a Honda curb-weight specification.
Weight is not identical across every model year in this page. Use the year-specific section rather than assuming one figure applies to every Benly.
The calculated power-to-weight figure is 3.05 hp per 100 lb across years with compatible data. It shows how much engine output is available relative to the bike’s mass.

Honda Benly weight FAQ

How much does the Honda Benly weigh?

The source data gives 231.5 lb (105 kg) to 255.7 lb (116 kg) as dry weight. A fueled, road-ready bike will weigh more than this figure.

How does the Honda Benly weight compare with similar Hondas?

It is not an extreme outlier for the category. The model ranks around the 38th percentile for weight among 70 compatible Honda scooters.

Are all Honda Benly model years the same weight?

There are year-to-year differences in the supplied data. The earliest covered year is used as the baseline, with later changed values shown separately above.

What does a full tank of gas weigh on the Honda Benly?

A full tank works out to about 16.4 lb (7.5 kg) from the listed 2.64 US gal (10 L) capacity. Actual fuel density varies slightly, so treat it as a practical estimate.

What does the Honda Benly weigh with a 180 lb rider?

The approximate combined total is 411.5 lb (186.6 kg) with a 180 lb rider, based on the representative dry weight used on this page.

Is the Honda Benly strong for its weight?

The calculated range is 3.05 hp per 100 lb. This ratio is usually more informative for acceleration comparisons than horsepower alone. That places it around the 15th percentile within the compatible Honda scooter power-to-weight comparison.

How much heavier will the Honda Benly be than its dry weight?

Do not treat dry weight as curb weight. Adding the listed fuel capacity alone produces roughly 247.9 lb (112.5 kg) to 272.2 lb (123.5 kg); the true ready-to-ride figure can still differ because dry-weight definitions vary.

What does the Honda Benly weigh with a full tank?

Based on the available dry-weight and tank-capacity data, a full-tank estimate is 247.9 lb (112.5 kg) to 272.2 lb (123.5 kg). Oil, coolant and market-specific equipment can still make actual ready-to-ride weight different.

How much torque does the Honda Benly have per 100 lb?

Available data gives 1.12 lb-ft per 100 lb to 2.48 lb-ft per 100 lb. That ratio helps explain how strong the engine is relative to the bike’s mass, especially at lower speeds.

Official information note

Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.