Triumph Tiger 900 Rally Pro Specs (Top Speed | Horsepower | Weight)

The Triumph Tiger 900 Rally Pro motorcycle specifications include a 888 cc (54.19 cu in) engine, a 6-speed gearbox, and a listed weight of 201 kg (443.1 lb).

Key specifications

2020-2023Model years
888 ccDisplacement
87.0 Nm @ 7,250 rpmTorque
201 kgDry weight
850 mmSeat height
20 LFuel tank
1,551 mmWheelbase
Model years covered
2020202120222023
Year-specific specification changes

The 2020 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Frame
2021Tubular steel, bolt on subframe
20222023Tubular steel, bolt on subframe. Twin-sided, cast aluminum alloy swingarm.
Front brakes
20212022Double disc. Brembo radial-type monobloc, with 4 pistons. Multi-mode ABS, Optimized Cornering ABS.
2023Double disc. Floating discs, Brembo Stylema 4-piston Monobloc calipers. Radial front master cylinder, Multi-mode ABS, Optimized Cornering ABS.
Fuel system
2021Injection. Multi-point sequential electronic fuel injection
20222023Injection. Multi-point sequential
Rear brakes
20212022Single disc. Brembo with single pistons. Multi-mode ABS, Optimized cornering ABS.
2023Single disc. Brembo single-piston sliding caliper, Multi-mode ABS, Optimized cornering ABS
Rear suspension
20222023Showa suspension unit, manual preload and rebound damping adjustmen
Wheelbase
20211,556 mm (61.3 inches)
Exhaust system
20212023Stainless steel 3-into-1 header system, side mounted stainless steel silencer
Overall height
202120221,452 mm (57.2 inches)
Seat height
2023860 mm (33.9 inches)

How the Triumph Tiger 900 Rally Pro compares

This compares the motorcycle with all Triumph models in this specifications database. The blue marker is this model and the grey line is the Triumph database average.

Displacement888 cc
Low 199 ccAverage 949 ccHigh 2,294 cc

About 6% lower than the Triumph database average. Around the 59th percentile across Triumph models.

Seat height850 mm
Low 690 mmAverage 789 mmHigh 855 mm

About 8% taller than the Triumph database average. Around the 98th percentile across Triumph models.

Fuel capacity20 L
Low 9.5 LAverage 17.9 LHigh 25 L

About 12% larger than the Triumph database average. Around the 83rd percentile across Triumph models.

This model Triumph database average

Triumph database percentile rankings

Percentiles show where this motorcycle sits across the Triumph specifications database. They are descriptive database rankings, not performance ratings.

Displacement59th

888 cc — larger displacement than about 59% of Triumph models.

Seat height98th

850 mm — taller than about 98% of Triumph models.

Fuel capacity83rd

20 L — larger than about 83% of Triumph fuel tanks in this database.

Dimensions compared with Triumph average

Each measurement is compared with the average value across Triumph models where that dimension is available.

Overall width935 mm
This bike

935

Triumph avg

821

14% above average.

Overall height1,502 mm
This bike

1,502

Triumph avg

1,199

25% above average.

Wheelbase1,551 mm
This bike

1,551

Triumph avg

1,491

4% above average.

Seat height850 mm
This bike

850

Triumph avg

789

8% above average.

Mechanical overview

Engine layout snapshot

In-line three, four-stroke • 888 cc • Liquid cooled
Chassis snapshot

Wheelbase 1,551 mmSeat 850 mm
6-speed • Chain (final drive) • 90/90-21 front / 150/70-R17 rear

Additional useful specifications

Front tire size 90/90-21
Rear tire size 150/70-R17
Front tire width 90 mm
Front tire aspect ratio 90%
Front rim diameter 21 in
Estimated theoretical fuel range 385 km
Bore/stroke ratio 1.26:1 (Oversquare)

Model information

Category Enduro / offroad

Engine specifications

Engine type In-line three, four-stroke
Displacement 888 cc (54.19 cu in)
Torque 87.0 Nm (8.9 kgf-m or 64.2 ft.lbs) @ 7,250 rpm
Bore × stroke 78.0 x 61.9 mm (3.1 x 2.4 inches)
Compression ratio 11.3:1
Cooling system Liquid
Fuel system Injection
Fuel control Double Overhead Cams/Twin Cam (DOHC)
Starter Electric

Transmission and drivetrain

Gearbox 6-speed
Final drive Chain (final drive)
Clutch Wet multi-plate

Chassis and suspension

Frame Tubular steel, bolt on sub
Front suspension Showa 45mm upside down forks, manual preload, rebound damping and compression damping adjustment,
Rear suspension Showa rear suspension unit, manual preload and rebound damping adjustment,
Front wheel travel 240 mm (9.4 inches)
Rear wheel travel 230 mm (9.1 inches)
Rake 24.4°
Trail 146 mm (5.7 inches)

Brakes, wheels and tires

Front brakes Double disc. Brembo radial-type monobloc, with 4 pistons
Rear brakes Single disc. Brembo with single pistons
Front tire 90/90-21
Rear tire 150/70-R17

Dimensions and weight

Dry weight 201 kg (443.1 lb)
Seat height 850 mm (33.5 inches)
Overall width 935 mm (36.8 inches)
Overall height 1,502 mm (59.1 inches)
Wheelbase 1,551 mm (61.1 inches)

Fuel and emissions

Fuel capacity 20.00 L (5.28 US gal)
Fuel consumption 5.20 L/100 km (19.2 km/l or 45.23 mpg)
Greenhouse gases 120.6 CO 2 g/km. (CO2 – Carbon dioxide emission)
Emission details Euro 5

Performance

Top speed 196.0 km/h (121.8 mph)
Power/weight ratio 0.4670 hp/kg

Other specifications

Color options Pure White, Saphire Black, Matt Khaki Green
Exhaust system Stainless 3-into-1 headers , side mounted stainless steel silencer

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Triumph models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Triumph information before relying on them. Visit the official Triumph website.