The Honda Lead EX motorcycle specifications include a 107 cc (6.53 cu in) engine, an automatic gearbox, and a listed weight of 120 kg (264.6 lb).
Key specifications
How the Honda Lead EX compares
This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.
About 81% lower than the Honda database average. Around the 8th percentile across Honda models.
About 39% lighter than the Honda database average. Around the 21st percentile across Honda models.
Very close to the Honda database average. Around the 38th percentile across Honda models.
About 52% smaller than the Honda database average. Around the 16th percentile across Honda models.
Honda database percentile rankings
Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.
107 cc — larger displacement than about 8% of Honda models.
120 kg — heavier than about 21% of Honda models, or lighter than about 79%.
760 mm — taller than about 38% of Honda models.
6.5 L — larger than about 16% of Honda fuel tanks in this database.
Dimensions compared with Honda average
Each measurement is compared with the average value across Honda models where that dimension is available.
1,832
2,078
12% below average.
680
827
18% below average.
1,120
1,161
4% below average.
1,275
1,431
11% below average.
760
780
Close to average.
138
184
25% below average.
Mechanical overview
Additional useful specifications
| Front tire size | 90/90-12 |
|---|---|
| Rear tire size | 100/90-10 |
| Front tire width | 90 mm |
| Front tire aspect ratio | 90% |
| Front rim diameter | 12 in |
| Rear tire width | 100 mm |
| Rear tire aspect ratio | 90% |
| Rear rim diameter | 10 in |
| Bore/stroke ratio | 0.91:1 (Undersquare) |
Model information
| Year released | 2015 |
|---|
Engine specifications
| Engine type | Single cylinder, four-stroke |
|---|---|
| Displacement | 107 cc (6.53 cu in) |
| Torque | 9.3 Nm (0.9 kgf-m or 6.9 ft.lbs) @ 6,250 rpm |
| Bore × stroke | 50.0 x 55 mm (2.0 x 2.2 inches) |
| Compression ratio | 11.0:1 |
| Valves per cylinder | 2 |
| Cooling system | Liquid |
| Fuel system | Injection. PGM-FI |
| Fuel control | Single Overhead Cams (SOHC) |
| Ignition | Fully transistorised electronic |
| Starter | Electric |
Transmission and drivetrain
| Gearbox | Automatic |
|---|---|
| Final drive | Belt (final drive) |
Chassis and suspension
| Frame | Underbone |
|---|---|
| Front suspension | 33mm telescopic fork, 80mm axle travel |
| Rear suspension | Single-damper unit swingarm, 70mm axle travel |
| Front wheel travel | 70 mm (2.8 inches) |
| Rear wheel travel | 80 mm (3.1 inches) |
Brakes, wheels and tires
| Front brakes | Single disc. Combined dual-piston calliper, drilled rotor and resin mould pads |
|---|---|
| Rear brakes | Expanding brake (drum brake) |
| Front tire | 90/90-12 |
| Rear tire | 100/90-10 |
| Wheels | U-section 5-spoke cast aluminium |
Dimensions and weight
| Wet weight | 120 kg (264.6 lb) |
|---|---|
| Dry weight | 114 kg (251.3 lb) |
| Seat height | 760 mm (29.9 inches) |
| Overall length | 1,832 mm (72.1 inches) |
| Overall width | 680 mm (26.8 inches) |
| Overall height | 1,120 mm (44.1 inches) |
| Wheelbase | 1,275 mm (50.2 inches) |
| Ground clearance | 138 mm (5.4 inches) |
Fuel and emissions
| Fuel capacity | 6.50 L (1.72 US gal) |
|---|
Performance
| Power/weight ratio | 0.0789 hp/kg |
|---|
Other specifications
| Color options | Black, white, silver, dark red, yellow |
|---|---|
| Seat | 2-person seat |
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.