For the 2012 model year, the Honda Lead 110 motorcycle has a supplied wet/running weight of 264.6 lb (120 kg) and a dry weight of 251.3 lb (114 kg).
Honda Lead 110 weight overview
The weight is relatively manageable, so the bike should demand less effort than a heavyweight machine when backing up, parking or making slow-speed corrections.
Light Motorcycle
How heavy is the Honda Lead 110?
wet weight
Using a model-level wet weight comparison, the Honda Lead 110 is lighter than about 77.7% of 166 Honda motorcycles with compatible weight data.
Dry vs ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Honda Lead 110 weight & related specs
| Model years covered | 2012 |
|---|---|
| Wet / running weight | 264.6 lb (120 kg) |
| Dry weight | 251.3 lb (114 kg) |
| Engine displacement | 107 cc |
| Torque | 6.9 lb-ft (9.3 Nm) |
| Fuel capacity | 1.72 US gal (6.5 L) |
| Full-tank fuel weight (estimated) | 10.7 lb (4.8 kg) |
Useful weight calculations
| Torque per 100 lb | 2.59 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.4 cc / lb |
| Weight per 100 cc | 247.2 lb / 100 cc |
| Fuel weight as % of bike weight | 4% |
| Weight with full tank | 262 lb (118.8 kg) |
What the weight numbers tell you
Honda Lead 110 weight FAQ
What is the Honda Lead 110 dry and wet weight?
Across the covered 2012 years, listed wet/running weight is 264.6 lb (120 kg) and listed dry weight is 251.3 lb (114 kg). Check the year-change section because the exact figure can vary by model year.
Is the Honda Lead 110 lighter or heavier than other Honda motorcycles?
It is comparatively light for this Honda category. The model lands near the 22nd percentile for weight in the compatible dataset.
How much does a full tank add to the Honda Lead 110?
Based on the supplied 1.72 US gal (6.5 L) tank capacity, the gasoline itself weighs about 10.7 lb (4.8 kg) when full. This helps explain part of the difference between dry and ready-to-ride mass.
What is the combined Honda Lead 110 and rider weight?
Using the model’s representative wet/running weight and a 180 lb rider, the combined bike-and-rider mass is about 444.6 lb (201.6 kg) before riding gear, luggage or a passenger.
How heavy is the Honda Lead 110 after filling the fuel tank?
Using the listed dry weight plus the calculated fuel mass, the estimated weight with a full tank is 262 lb (118.8 kg). That still may not equal official curb weight because dry-weight definitions can exclude other fluids or equipment.
What is the Honda Lead 110 torque per 100 lb of bike weight?
Where compatible torque and weight figures are available, the model works out to 2.59 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.
How many cc does the Honda Lead 110 have per pound?
The available figures work out to 0.4 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.
How does the Honda Lead 110 compare with the median Honda motorcycle weight?
Compared with the median Honda motorcycle weight of 452.6 lb (205.3 kg), the model is roughly 188 lb (85.3 kg) lighter.
Where will I notice the Honda Lead 110 weight most?
Expect the weight to matter more off the throttle than at speed: garage movement, uneven footing and parking angle are the practical situations to think about.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.