Honda SCV 100 Lead Specs (Top Speed | Horsepower | Weight)

The Honda SCV 100 Lead motorcycle specifications include a 102.1 cc (6.23 cu in) engine and a listed weight of 100.5 kg (221.6 lb).

Key specifications

2006-2007Model years
102 ccDisplacement
7.5 Nm @ 5,500 rpmTorque
100.5 kgDry weight
765 mmSeat height
6 LFuel tank
1,235 mmWheelbase
145 mmGround clearance
Model years covered
20062007
Year-specific specification changes

The 2006 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Dry weight
2007102 kg (224.9 lb)
Fuel system
2007Carburettor
Ground clearance
2007150 mm (5.9 inches)
Power/weight ratio
20070.1324 hp/kg

How the Honda SCV 100 Lead compares

This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.

Displacement102 cc
Low 49 ccAverage 563 ccHigh 1,832 cc

About 82% lower than the Honda database average. Around the 7th percentile across Honda models.

Seat height765 mm
Low 650 mmAverage 780 mmHigh 960 mm

Very close to the Honda database average. Around the 40th percentile across Honda models.

Fuel capacity6 L
Low 3.7 LAverage 13.5 LHigh 25 L

About 55% smaller than the Honda database average. Around the 14th percentile across Honda models.

This model Honda database average

Honda database percentile rankings

Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.

Displacement7th

102 cc — larger displacement than about 7% of Honda models.

Seat height40th

765 mm — taller than about 40% of Honda models.

Fuel capacity14th

6 L — larger than about 14% of Honda fuel tanks in this database.

Dimensions compared with Honda average

Each measurement is compared with the average value across Honda models where that dimension is available.

Wheelbase1,235 mm
This bike

1,235

Honda avg

1,431

14% below average.

Seat height765 mm
This bike

765

Honda avg

780

Close to average.

Ground clearance145 mm
This bike

145

Honda avg

184

21% below average.

Mechanical overview

Engine layout snapshot

Single cylinder, four-stroke • 102 cc • Air cooled
Chassis snapshot

Wheelbase 1,235 mmSeat 765 mmClearance 145 mm
Belt (final drive)

Additional useful specifications

Bore/stroke ratio 0.96:1 (Undersquare)

Model information

Category Scooter

Engine specifications

Engine type Single cylinder, four-stroke
Displacement 102.1 cc (6.23 cu in)
Torque 7.5 Nm (0.8 kgf-m or 5.5 ft.lbs) @ 5,500 rpm
Bore × stroke 50.0 x 52 mm (2.0 x 2.0 inches)
Compression ratio 9.0:1
Cooling system Air
Fuel system Carburettor. 18mm VK-type
Fuel control Single Overhead Cams (SOHC)
Ignition Capacitor Discharge (CDI)
Starter Electric & kick

Transmission and drivetrain

Final drive Belt (final drive)
Clutch Centrifugal, automatic

Chassis and suspension

Trail 90 mm (3.5 inches)

Brakes, wheels and tires

Front brakes Expanding brake (drum brake)
Rear brakes Expanding brake (drum brake)

Dimensions and weight

Dry weight 100.5 kg (221.6 lb)
Seat height 765 mm (30.1 inches)
Wheelbase 1,235 mm (48.6 inches)
Ground clearance 145 mm (5.7 inches)

Fuel and emissions

Fuel capacity 6.00 L (1.59 US gal)

Performance

Power/weight ratio 0.0687 hp/kg

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.