For the 2016 model year, the Kawasaki KSR PRO motorcycle has a listed dry weight of 207.2 lb (94 kg).
Kawasaki KSR PRO weight overview
Its low overall mass should be most noticeable off the throttle: moving it by hand, backing out of a parking space and managing stop-start riding should take less effort than on a heavy road bike. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Very Light Motorcycle
How heavy is the Kawasaki KSR PRO?
dry weight
Using a model-level dry weight comparison, the Kawasaki KSR PRO is lighter than about 91.4% of 81 Kawasaki motorcycles with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Kawasaki KSR PRO weight & related specs
| Model years covered | 2016 |
|---|---|
| Dry weight | 207.2 lb (94 kg) |
| Engine displacement | 111 cc |
| Torque | 6.2 lb-ft (8.4 Nm) |
| Fuel capacity | 1.93 US gal (7.3 L) |
| Full-tank fuel weight (estimated) | 12 lb (5.4 kg) |
Useful weight calculations
| Torque per 100 lb | 2.99 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.54 cc / lb |
| Weight per 100 cc | 186.7 lb / 100 cc |
| Fuel weight as % of bike weight | 5.8% |
| Weight with full tank | 219.2 lb (99.4 kg) |
What the weight numbers tell you
Kawasaki KSR PRO weight FAQ
What is the Kawasaki KSR PRO dry weight?
The available dry weight is 207.2 lb (94 kg). Actual ready-to-ride weight will be higher after fuel and operating fluids are added.
Is the Kawasaki KSR PRO lighter or heavier than other Kawasaki motorcycles?
It is comparatively light for this Kawasaki category. The model lands near the 9th percentile for weight in the compatible dataset.
How much does a full tank add to the Kawasaki KSR PRO?
Based on the supplied 1.93 US gal (7.3 L) tank capacity, the gasoline itself weighs about 12 lb (5.4 kg) when full. This helps explain part of the difference between dry and ready-to-ride mass.
What is the combined Kawasaki KSR PRO and rider weight?
Using the model’s representative dry weight and a 180 lb rider, the combined bike-and-rider mass is about 387.2 lb (175.6 kg) before riding gear, luggage or a passenger.
Is the listed Kawasaki KSR PRO weight ready to ride?
The published usable figure is dry, not curb weight. A simple dry-plus-full-fuel estimate is 219.2 lb (99.4 kg), but that still is not a substitute for an official wet/curb specification.
What is the estimated Kawasaki KSR PRO weight with a full tank of gas?
The page calculates about 219.2 lb (99.4 kg) with a full tank by adding the listed fuel mass to the dry figure. Treat this as a practical estimate, not an official Kawasaki curb-weight number.
What is the Kawasaki KSR PRO torque-to-weight ratio?
Where compatible torque and weight figures are available, the model works out to 2.99 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.
How large is the Kawasaki KSR PRO engine for its weight?
The available figures work out to 0.54 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.
Is the Kawasaki KSR PRO above or below the typical Kawasaki motorcycle weight?
Compared with the median Kawasaki motorcycle weight of 396.8 lb (180 kg), the model is roughly 189.6 lb (86 kg) lighter.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Kawasaki website.