For the 2017 model year, the Kawasaki KSR 110 motorcycle has a listed dry weight of 207.2 lb (94 kg).
Kawasaki KSR 110 weight overview
This sits at the very light end of motorcycle mass, which is especially useful when the bike has to be moved around by hand or held on uneven ground. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Very Light Motorcycle
How heavy is the Kawasaki KSR 110?
dry weight
Using a model-level dry weight comparison, the Kawasaki KSR 110 is lighter than about 91.4% of 81 Kawasaki motorcycles with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Kawasaki KSR 110 weight & related specs
| Model years covered | 2017 |
|---|---|
| Dry weight | 207.2 lb (94 kg) |
| Engine displacement | 110 cc |
| Torque | 6.3 lb-ft (8.6 Nm) |
| Fuel capacity | 1.93 US gal (7.3 L) |
| Full-tank fuel weight (estimated) | 12 lb (5.4 kg) |
Useful weight calculations
| Torque per 100 lb | 3.06 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.53 cc / lb |
| Weight per 100 cc | 188.4 lb / 100 cc |
| Fuel weight as % of bike weight | 5.8% |
| Weight with full tank | 219.2 lb (99.4 kg) |
What the weight numbers tell you
Kawasaki KSR 110 weight FAQ
How heavy is the Kawasaki KSR 110?
Listed dry weight is 207.2 lb (94 kg). Because no usable wet/running figure was supplied, treat that as a lower starting point rather than the exact on-road weight.
Is the Kawasaki KSR 110 heavy compared with other Kawasaki motorcycles?
It is on the lighter side in this dataset. Its representative dry weight sits around the 9th weight percentile among 81 Kawasaki motorcycles, meaning most compatible models are heavier.
How much does the Kawasaki KSR 110 fuel weigh?
The listed tank capacity is 1.93 US gal (7.3 L). Using approximately 0.745 kg/L gasoline, a full tank is roughly 12 lb (5.4 kg). That is an estimate for fuel mass, not an official Kawasaki curb-weight calculation.
How heavy is the Kawasaki KSR 110 with an average-size rider?
A 180 lb rider brings the simple bike-plus-rider total to roughly 387.2 lb (175.6 kg) using the representative dry figure. Gear and luggage would add more.
Can I treat the Kawasaki KSR 110 dry weight as curb weight?
No. The usable figure is dry weight, so it excludes at least some operating fluids. Dry weight plus the estimated full fuel load is about 219.2 lb (99.4 kg), and oil/coolant or definition differences may add more.
What is the estimated Kawasaki KSR 110 weight with a full tank of gas?
Based on the available dry-weight and tank-capacity data, a full-tank estimate is 219.2 lb (99.4 kg). Oil, coolant and market-specific equipment can still make actual ready-to-ride weight different.
How much torque does the Kawasaki KSR 110 have per 100 lb?
The calculated torque-to-weight range is 3.06 lb-ft per 100 lb. It is useful for comparing bikes with very different overall weights.
What is the Kawasaki KSR 110 displacement per pound?
Engine displacement relative to bike weight is 0.53 cc per lb. It can help compare motorcycles from very different displacement classes without relying on cc alone.
What is the Kawasaki KSR 110 weight difference versus the category median?
The model sits about 189.6 lb (86 kg) lighter than the compatible median Kawasaki motorcycle weight used on this page.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Kawasaki website.