The Yamaha TZR Race Replica motorcycle dimensions for 2006 is length 86.7 in (2,202 mm), width 27.1 in (689 mm), height 43.5 in (1,105 mm), wheelbase 52.8 in (1,341 mm), seat height 32.1 in (815 mm), and the ground clearance is 5.9 in (151 mm).
Yamaha TZR Race Replica dimensions at a glance
Dimension charts
Position within similar Yamaha models
Representative dimensions shown within the observed range for comparable Yamaha models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Yamaha model group.
Useful dimension ratios
Seat height feel
About 32.1 in — a seat height around the category middle. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
60.9% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 33.9 in (861 mm) combined beyond the axle-to-axle distance.
Bounding-box footprint
About 16.3 sq ft (1.52 m²), calculated from listed overall length × width. Useful for rough storage planning.
Clearance / wheelbase
11.3%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Yamaha models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 86.7 in (2,202 mm) | 81.1 in (2,060 mm) | 5.6 in above median |
| Width | 27.1 in (689 mm) | 28.3 in (720 mm) | 1.2 in below median |
| Height | 43.5 in (1,105 mm) | 44.7 in (1,135 mm) | 1.2 in below median |
| Wheelbase | 52.8 in (1,341 mm) | 54.3 in (1,380 mm) | 1.5 in below median |
| Seat height | 32.1 in (815 mm) | 32.1 in (815 mm) | About the same as median |
| Ground clearance | 5.9 in (151 mm) | 5.5 in (140 mm) | 0.4 in above median |
Yamaha TZR Race Replica dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2006 | 86.7 in (2,202 mm) | 27.1 in (689 mm) | 43.5 in (1,105 mm) | 52.8 in (1,341 mm) | 32.1 in (815 mm) | 5.9 in (151 mm) |
Yamaha TZR Race Replica dimensions FAQ
Is the Yamaha TZR Race Replica seat height low or tall?
The representative seat height is 32.1 in (815 mm), which is a seat height around the category middle. About the same as the category median.
Does the Yamaha TZR Race Replica have a short or long wheelbase?
The representative wheelbase is 52.8 in (1,341 mm), giving the Yamaha TZR Race Replica a shorter-than-typical wheelbase. 1.5 in below the category median. The wheelbase is about 60.9% of overall length.
How much ground clearance does the Yamaha TZR Race Replica have?
The representative ground clearance is 5.9 in (151 mm), which is ground clearance around the category middle. 0.4 in above the category median.
Is the Yamaha TZR Race Replica compact or large?
The representative overall length is 86.7 in (2,202 mm), making the Yamaha TZR Race Replica among the longest comparable Yamaha models. 5.6 in above the category median. Its rough length × width storage footprint is about 16.3 sq ft (1.52 m²).
What do the Yamaha TZR Race Replica width and height suggest?
Its representative width is 27.1 in (689 mm) and representative height is 43.5 in (1,105 mm). The width is very narrow for its category. The height is lower than most comparable Yamaha models.
What is the main dimension takeaway for the Yamaha TZR Race Replica?
The main listed figures are overall length 86.7 in (2,202 mm), wheelbase 52.8 in (1,341 mm), seat height 32.1 in (815 mm), and ground clearance 5.9 in (151 mm). Its clearance-to-wheelbase ratio is about 11.3%, which is a simple way to relate ground clearance to the bike’s axle spacing.