Across the 2007, 2008 and 2009 model years, the Yamaha FZ6 Fazer S2 motorcycle has supplied wet/running weights ranging from 456.4 lb (207 kg) and dry weights ranging from 407.9 lb (185 kg) to 410.1 lb (186 kg), depending on model year.
Yamaha FZ6 Fazer S2 weight overview
At this weight, footing and parking technique matter. Once moving, geometry and balance can disguise the mass, but you still have to manage the full weight at walking speed.
Heavy Motorcycle
How heavy is the Yamaha FZ6 Fazer S2?
wet weight
Using a model-level wet weight comparison, the Yamaha FZ6 Fazer S2 is heavier than about 61.6% of 69 Yamaha naked bikes with compatible weight data.
Dry vs ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Yamaha FZ6 Fazer S2 weight & related specs
| Model years covered | 2007, 2008, 2009 |
|---|---|
| Wet / running weight | 456.4 lb (207 kg) |
| Dry weight | 407.9 lb (185 kg) to 410.1 lb (186 kg) |
| Engine displacement | 600 cc |
| Power | 96.6 hp |
| Torque | 46.5 lb-ft (63.1 Nm) |
| Fuel capacity | 5.12 US gal (19.4 L) |
| Full-tank fuel weight (estimated) | 31.9 lb (14.5 kg) |
Weight changes by model year
The 2007 model is used as the baseline where data is available. Only later supplied values that differ are shown below. A year pill does not mean every individual weight field was supplied for that year.
Useful weight calculations
| Horsepower per 100 lb | 23.68 hp / 100 lb |
|---|---|
| Pounds per horsepower | 4.22 lb / hp |
| Torque per 100 lb | 10.2 lb-ft / 100 lb to 11.41 lb-ft / 100 lb |
| Displacement per pound | 1.31 cc / lb to 1.47 cc / lb |
| Weight per 100 cc | 68 lb / 100 cc to 76.1 lb / 100 cc |
| Fuel weight as % of bike weight | 7% to 7.8% |
| Weight with full tank | 439.7 lb (199.5 kg) to 441.9 lb (200.5 kg) |
What the weight numbers tell you
Yamaha FZ6 Fazer S2 weight FAQ
What is the Yamaha FZ6 Fazer S2 dry and wet weight?
Across the covered 2007-2009 years, listed wet/running weight is 456.4 lb (207 kg) and listed dry weight is 407.9 lb (185 kg) to 410.1 lb (186 kg). Check the year-change section because the exact figure can vary by model year.
Is the Yamaha FZ6 Fazer S2 lighter or heavier than other Yamaha naked bikes?
Weight is broadly typical for the category, landing around the 62nd percentile in this model-level Yamaha comparison.
Which Yamaha FZ6 Fazer S2 years have different weight specs?
The supplied data shows different weight figures across the 2007-2009 model years. Use the year-specific changes section above for the exact value attached to each changed year.
How much does a full tank add to the Yamaha FZ6 Fazer S2?
Based on the supplied 5.12 US gal (19.4 L) tank capacity, the gasoline itself weighs about 31.9 lb (14.5 kg) when full. This helps explain part of the difference between dry and ready-to-ride mass.
What is the combined Yamaha FZ6 Fazer S2 and rider weight?
Using the model’s representative wet/running weight and a 180 lb rider, the combined bike-and-rider mass is about 636.4 lb (288.6 kg) before riding gear, luggage or a passenger.
What is the Yamaha FZ6 Fazer S2 power-to-weight ratio?
Available model-year data produces 23.68 hp per 100 lb. It shows engine output relative to motorcycle mass rather than just quoting peak horsepower. That places it around the 82nd percentile within the compatible Yamaha naked bike power-to-weight comparison.
What is the Yamaha FZ6 Fazer S2 full-tank weight estimate?
Filling the listed tank brings the calculated bike weight to roughly 439.7 lb (199.5 kg) to 441.9 lb (200.5 kg). This estimate is most useful when no official wet/running figure is available.
How much of the Yamaha FZ6 Fazer S2 total weight comes from fuel?
The calculated full-tank fuel mass is about 7% to 7.8% of the bike’s listed weight. This helps show why a dry-weight number can understate what you actually manage on the road.
How does Yamaha FZ6 Fazer S2 torque compare with its weight?
Where compatible torque and weight figures are available, the model works out to 10.2 lb-ft per 100 lb to 11.41 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Yamaha Motorsports website.