Triumph Daytona 750 (reduced effect 2) Specs (Top Speed | Horsepower | Weight)

The Triumph Daytona 750 (reduced effect 2) motorcycle specifications include a 748 cc (45.64 cu in) engine, a 6-speed gearbox, and a listed weight of 260 kg (573.2 lb).

Key specifications

1991-1992Model years
748 ccDisplacement
260 kgWet weight
25 LFuel tank
Model years covered
19911992

Year-specific specification changes

No material specification changes from the 1991 baseline were found in the available data.

How the Triumph Daytona 750 (reduced effect 2) compares

This compares the motorcycle with all Triumph models in this specifications database. The blue marker is this model and the grey line is the Triumph database average.

Displacement748 cc
Low 199 ccAverage 949 ccHigh 2,294 cc

About 21% lower than the Triumph database average. Around the 30th percentile across Triumph models.

Wet weight260 kg
Low 168.3 kgAverage 236.2 kgHigh 380 kg

About 10% heavier than the Triumph database average. Around the 81st percentile across Triumph models.

Fuel capacity25 L
Low 9.5 LAverage 17.9 LHigh 25 L

About 40% larger than the Triumph database average. Around the 98th percentile across Triumph models.

This model Triumph database average

Triumph database percentile rankings

Percentiles show where this motorcycle sits across the Triumph specifications database. They are descriptive database rankings, not performance ratings.

Displacement30th

748 cc — larger displacement than about 30% of Triumph models.

Wet weight81st

260 kg — heavier than about 81% of Triumph models, or lighter than about 19%.

Fuel capacity98th

25 L — larger than about 98% of Triumph fuel tanks in this database.

Mechanical overview

Engine layout snapshot

In-line three, four-stroke • 748 cc • Liquid cooled
Chassis snapshot

6-speed • Chain (final drive) • 120/70-17 front / 160/60-18 rear

Additional useful specifications

Front tire size 120/70-17
Rear tire size 160/60-18
Front tire width 120 mm
Front tire aspect ratio 70%
Front rim diameter 17 in
Rear tire width 160 mm
Rear tire aspect ratio 60%
Rear rim diameter 18 in
Bore/stroke ratio 1.38:1 (Oversquare)

Model information

Category Unspecified category

Engine specifications

Engine type In-line three, four-stroke
Displacement 748 cc (45.64 cu in)
Bore × stroke 76.0 x 55 mm (3.0 x 2.2 inches)
Compression ratio 11.0:1
Valves per cylinder 4
Cooling system Liquid
Fuel control Double Overhead Cams/Twin Cam (DOHC)

Transmission and drivetrain

Gearbox 6-speed
Final drive Chain (final drive)

Brakes, wheels and tires

Front brakes Dual disc
Rear brakes Single disc
Front tire 120/70-17
Rear tire 160/60-18

Dimensions and weight

Wet weight 260 kg (573.2 lb)

Fuel and emissions

Fuel capacity 25.00 L (6.61 US gal)

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Triumph models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Triumph information before relying on them. Visit the official Triumph website.