Harley-Davidson Model KK Specs (Top Speed | Horsepower | Weight)

The Harley-Davidson Model KK motorcycle specifications include a 743 cc (45.34 cu in) engine, a 4-speed gearbox, and a listed weight of 183 kg (403.4 lb).

Key specifications

1952-1953Model years
743 ccDisplacement
183 kgDry weight
17 LFuel tank
1,435 mmWheelbase
Model years covered
19521953
Year-specific specification changes

The 1952 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Wheels
1953Wire spoked

How the Harley-Davidson Model KK compares

This compares the motorcycle with all Harley-Davidson models in this specifications database. The blue marker is this model and the grey line is the Harley-Davidson database average.

Displacement743 cc
Low 165 ccAverage 1,275 ccHigh 1,868 cc

About 42% lower than the Harley-Davidson database average. Around the 10th percentile across Harley-Davidson models.

Fuel capacity17 L
Low 7.9 LAverage 17 LHigh 22.7 L

Very close to the Harley-Davidson database average. Around the 40th percentile across Harley-Davidson models.

This model Harley-Davidson database average

Harley-Davidson database percentile rankings

Percentiles show where this motorcycle sits across the Harley-Davidson specifications database. They are descriptive database rankings, not performance ratings.

Displacement10th

743 cc — larger displacement than about 10% of Harley-Davidson models.

Fuel capacity40th

17 L — larger than about 40% of Harley-Davidson fuel tanks in this database.

Mechanical overview

Engine layout snapshot

V2, four-stroke • 743 cc • Air cooled
Chassis snapshot

Wheelbase 1,435 mm
4-speed • Chain (final drive) • 3.25-19 front / 3.25-19 rear

Additional useful specifications

Front tire size 3.25-19
Rear tire size 3.25-19
Engine oil capacity 2.80 L (2.96 US qt)
Bore/stroke ratio 0.72:1 (Undersquare)

Model information

Category Allround

Engine specifications

Engine type V2, four-stroke
Displacement 743 cc (45.34 cu in)
Bore × stroke 70.0 x 97 mm (2.8 x 3.8 inches)
Cooling system Air
Fuel system Carburettor. Linkert
Fuel control Sidevalves
Starter Kick
Oil capacity 2.80 L (2.96 US qt)

Transmission and drivetrain

Gearbox 4-speed
Final drive Chain (final drive)

Chassis and suspension

Frame Steel single downtube
Front suspension Hydraulic telescopic fork
Rear suspension Swing-arm, twin hydraulic shocks

Brakes, wheels and tires

Front brakes Expanding brake (drum brake)
Rear brakes Expanding brake (drum brake)
Front tire 3.25-19
Rear tire 3.25-19
Wheels Wire spoked. Goodyear or Firestone tyres.

Dimensions and weight

Dry weight 183 kg (403.4 lb)
Wheelbase 1,435 mm (56.5 inches)

Fuel and emissions

Fuel capacity 17.00 L (4.49 US gal)

Performance

Top speed 129.0 km/h (80.2 mph)

Electrical and instruments

Electrical 6 Volt

Other specifications

Seat Solo seat
Exhaust system 2-into-1 chrome
Comments Model KK had larger racing cams, carb modifications, head modifications and cylinder porting to match compared to Model-K.

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Harley-Davidson models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Harley-Davidson information before relying on them. Visit the official Harley-Davidson website.