Harley-Davidson EL Specs (Top Speed | Horsepower | Weight)

The Harley-Davidson EL motorcycle specifications include a 999.7 cc (61.00 cu in) engine, a 3-speed gearbox, and a listed weight of 250 kg (551.2 lb).

Key specifications

1948-1952Model years
1,000 ccDisplacement
250 kgDry weight
14.2 LFuel tank
1,511 mmWheelbase
Model years covered
19481949195019511952
Year-specific specification changes

The 1948 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Electrical
1950195222 Ah, 6 Volt battery.
Wheels
19491951Wire spoked. Firestome or Goodyear tyres.
1952Wire spoked. Firestoe or Goodyear tyres.

How the Harley-Davidson EL compares

This compares the motorcycle with all Harley-Davidson models in this specifications database. The blue marker is this model and the grey line is the Harley-Davidson database average.

Displacement1,000 cc
Low 165 ccAverage 1,275 ccHigh 1,868 cc

About 22% lower than the Harley-Davidson database average. Around the 26th percentile across Harley-Davidson models.

Fuel capacity14.2 L
Low 7.9 LAverage 17 LHigh 22.7 L

About 17% smaller than the Harley-Davidson database average. Around the 29th percentile across Harley-Davidson models.

This model Harley-Davidson database average

Harley-Davidson database percentile rankings

Percentiles show where this motorcycle sits across the Harley-Davidson specifications database. They are descriptive database rankings, not performance ratings.

Displacement26th

1,000 cc — larger displacement than about 26% of Harley-Davidson models.

Fuel capacity29th

14.2 L — larger than about 29% of Harley-Davidson fuel tanks in this database.

Mechanical overview

Engine layout snapshot

V2, four-stroke • 1,000 cc • Air cooled
Chassis snapshot

Wheelbase 1,511 mm
3-speed • Chain (final drive) • 5.00-16 front / 5.00-16 rear

Additional useful specifications

Front tire size 5.00-16
Rear tire size 5.00-16
Engine oil capacity 3.80 L (4.02 US qt)
Bore/stroke ratio 1.06:1 (Oversquare)

Engine specifications

Engine type V2, four-stroke
Displacement 999.7 cc (61.00 cu in)
Bore × stroke 88.9 x 83.8 mm (3.5 x 3.3 inches)
Compression ratio 7.0:1
Cooling system Air
Fuel system Carburettor
Fuel control Overhead Valves (OHV)
Lubrication Ciculation pressure system
Oil capacity 3.80 L (4.02 US qt)

Transmission and drivetrain

Gearbox 3-speed
Final drive Chain (final drive)
Clutch Mulitplate, dry

Chassis and suspension

Frame Steel double loop
Front suspension Spring forks
Rear suspension Hardtail

Brakes, wheels and tires

Front brakes Expanding brake (drum brake)
Rear brakes Expanding brake (drum brake)
Front tire 5.00-16
Rear tire 5.00-16
Wheels Wire spoked

Dimensions and weight

Dry weight 250 kg (551.2 lb)
Wheelbase 1,511 mm (59.5 inches)

Fuel and emissions

Fuel capacity 14.19 L (3.75 US gal)

Electrical and instruments

Electrical 6 Volt battery.

Other specifications

Comments Optional 4-speed transmission.

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Harley-Davidson models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Harley-Davidson information before relying on them. Visit the official Harley-Davidson website.