For the 2000 model year, the Suzuki AN 250 Burgman motorcycle has a listed dry weight of 366 lb (166 kg).
Suzuki AN 250 Burgman weight overview
The bike falls into a normal middleweight range. At road speed the mass is usually less obvious; parking, slopes and walking-speed maneuvers are where you notice it most. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Middleweight Motorcycle
How heavy is the Suzuki AN 250 Burgman?
dry weight
Using a model-level dry weight comparison, the Suzuki AN 250 Burgman is heavier than about 53.2% of 108 Suzuki motorcycles with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Suzuki AN 250 Burgman weight & related specs
| Model years covered | 2000 |
|---|---|
| Dry weight | 366 lb (166 kg) |
| Engine displacement | 249 cc |
| Torque | 18.4 lb-ft (25 Nm) |
Useful weight calculations
| Torque per 100 lb | 5.04 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.68 cc / lb |
| Weight per 100 cc | 147 lb / 100 cc |
What the weight numbers tell you
Suzuki AN 250 Burgman weight FAQ
What is the Suzuki AN 250 Burgman dry weight?
The available dry weight is 366 lb (166 kg). Actual ready-to-ride weight will be higher after fuel and operating fluids are added.
Is the Suzuki AN 250 Burgman lighter or heavier than other Suzuki motorcycles?
Weight is broadly typical for the category, landing around the 53rd percentile in this model-level Suzuki comparison.
What is the combined Suzuki AN 250 Burgman and rider weight?
Using the model’s representative dry weight and a 180 lb rider, the combined bike-and-rider mass is about 546 lb (247.6 kg) before riding gear, luggage or a passenger.
Is the listed Suzuki AN 250 Burgman weight ready to ride?
No. Dry weight excludes at least some operating fluids, so the actual ready-to-ride motorcycle will weigh more.
How much torque does the Suzuki AN 250 Burgman have per 100 lb?
Where compatible torque and weight figures are available, the model works out to 5.04 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.
What is the Suzuki AN 250 Burgman displacement per pound?
The available figures work out to 0.68 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.
What is the Suzuki AN 250 Burgman weight difference versus the category median?
Compared with the median Suzuki motorcycle weight of 345 lb (156.5 kg), the model is roughly 20.9 lb (9.5 kg) heavier.
Where will I notice the Suzuki AN 250 Burgman weight most?
Expect the weight to matter more off the throttle than at speed: garage movement, uneven footing and parking angle are the practical situations to think about.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Suzuki Cycles website.