For the 2017 model year, the Suzuki Access 125 SE motorcycle has a listed wet/running weight of 224.9 lb (102 kg).
Suzuki Access 125 SE weight overview
This is a genuinely light bike. That usually makes parking, pushing it around a garage and catching small low-speed balance errors easier than on larger motorcycles.
Very Light Motorcycle
How heavy is the Suzuki Access 125 SE?
wet weight
Using a model-level wet weight comparison, the Suzuki Access 125 SE is lighter than about 72.6% of 31 Suzuki scooters with compatible weight data.
Ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Suzuki Access 125 SE weight & related specs
| Model years covered | 2017 |
|---|---|
| Wet / running weight | 224.9 lb (102 kg) |
| Engine displacement | 124 cc |
| Torque | 7.5 lb-ft (10.2 Nm) |
| Fuel capacity | 1.48 US gal (5.6 L) |
| Full-tank fuel weight (estimated) | 9.2 lb (4.2 kg) |
Useful weight calculations
| Torque per 100 lb | 3.35 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.55 cc / lb |
| Weight per 100 cc | 181.3 lb / 100 cc |
| Fuel weight as % of bike weight | 4.1% |
What the weight numbers tell you
Suzuki Access 125 SE weight FAQ
How much does the Suzuki Access 125 SE weigh?
The available wet/running figure is 224.9 lb (102 kg). This is more representative of the motorcycle you actually push, park and ride than a dry-only specification.
How does the Suzuki Access 125 SE weight compare with similar Suzukis?
Relatively light. On a model-level comparison, it is lighter than about 72.6% of 31 Suzuki scooters with the same weight basis.
What does a full tank of gas weigh on the Suzuki Access 125 SE?
A full tank works out to about 9.2 lb (4.2 kg) from the listed 1.48 US gal (5.6 L) capacity. Actual fuel density varies slightly, so treat it as a practical estimate.
What does the Suzuki Access 125 SE weigh with a 180 lb rider?
The approximate combined total is 404.9 lb (183.6 kg) with a 180 lb rider, based on the representative wet/running weight used on this page.
How much torque does the Suzuki Access 125 SE have per 100 lb?
Available data gives 3.35 lb-ft per 100 lb. That ratio helps explain how strong the engine is relative to the bike’s mass, especially at lower speeds.
What is the Suzuki Access 125 SE displacement per pound?
The model has about 0.55 cc per lb in the available data. This simply shows how much engine displacement there is for each pound of motorcycle weight.
What is the Suzuki Access 125 SE weight difference versus the category median?
The representative wet weight is about 19.8 lb (9 kg) lighter than the median Suzuki scooter weight of 244.7 lb (111 kg) in this dataset.
Is the Suzuki Access 125 SE easy to move around by hand?
By scale weight it is light, so backing up, garage movement and slow-speed corrections should require less effort than on heavier bikes. Geometry still matters.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Suzuki Cycles website.