The Ducati 250 Mark 3D motorcycle specifications include a 249 cc (15.19 cu in) engine, a 5-speed gearbox, and a listed weight of 131 kg (288.8 lb).
Key specifications
Year-specific specification changes
How the Ducati 250 Mark 3D compares
This compares the motorcycle with all Ducati models in this specifications database. The blue marker is this model and the grey line is the Ducati database average.
About 72% lower than the Ducati database average. Around the 6th percentile across Ducati models.
About 9% lower than the Ducati database average. Around the 1st percentile across Ducati models.
About 22% smaller than the Ducati database average. Around the 4th percentile across Ducati models.
Ducati database percentile rankings
Percentiles show where this motorcycle sits across the Ducati specifications database. They are descriptive database rankings, not performance ratings.
249 cc — larger displacement than about 6% of Ducati models.
735 mm — taller than about 1% of Ducati models.
12.9 L — larger than about 4% of Ducati fuel tanks in this database.
Dimensions compared with Ducati average
Each measurement is compared with the average value across Ducati models where that dimension is available.
2,000
2,131
6% below average.
590
823
28% below average.
735
808
9% below average.
Mechanical overview
Additional useful specifications
| Front tire size | 2.75-18 |
|---|---|
| Rear tire size | 3.00-18 |
Model information
| Category | Sport |
|---|
Engine specifications
| Engine type | Single cylinder, four-stroke |
|---|---|
| Displacement | 249 cc (15.19 cu in) |
| Compression ratio | 9.7:1 |
| Valves per cylinder | 2 |
| Cooling system | Air |
| Fuel system | Carburettor |
| Fuel control | Desmodromic valve control |
| Lubrication | Wet sump forced lubrication with gear pump |
Transmission and drivetrain
| Gearbox | 5-speed |
|---|---|
| Final drive | Chain (final drive) |
Chassis and suspension
| Frame | Simplex open cradle tubular steel |
|---|---|
| Front suspension | Hydraulic telescopic forks |
| Rear suspension | Swinging arm rear suspension with adjustable hydraulic shocks |
| Front wheel travel | 120 mm (4.7 inches) |
| Rear wheel travel | 70 mm (2.8 inches) |
Brakes, wheels and tires
| Front brakes | Expanding brake (drum brake) |
|---|---|
| Rear brakes | Expanding brake (drum brake) |
| Front tire | 2.75-18 |
| Rear tire | 3.00-18 |
Dimensions and weight
| Dry weight | 131 kg (288.8 lb) |
|---|---|
| Seat height | 735 mm (28.9 inches) |
| Overall length | 2,000 mm (78.7 inches) |
| Overall width | 590 mm (23.2 inches) |
Fuel and emissions
| Fuel capacity | 12.90 L (3.41 US gal) |
|---|
Performance
| Top speed | 160.0 km/h (99.4 mph) |
|---|---|
| Power/weight ratio | 0.1527 hp/kg |
Other specifications
| Seat | Dual seat |
|---|---|
| Comments | Price as new 2895DM |
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Ducati models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Ducati information before relying on them. Visit the official Ducati website.