Can anyone help me. My Honda Shadow 600 just won’t start no matter what I do. Thankyou!
Response
I had the same problem with my Shadow 600 motorcycle. I repaired it by cleaning the terminals with a wire brush and applied terminal grease as well.
Solutions that worked for users
Solution | Users Who Found Success | Approx. Cost (USD) | Approx. Time Needed (Minutes) |
---|---|---|---|
Checking and Cleaning Fuel Filter | 4 | $5 – $15 | 30 – 45 |
Using Ethanol-Free Gas and Seafoam | 3 | $10 – $20 | 15 – 30 |
Regular Riding | 3 | $0 | Varies |
Battery and Cable Check | 3 | $0 | 10 – 20 |
Starter Relay Testing | 3 | $0 | 15 – 30 |
Ignition Fuse Check | 2 | $1 – $5 | 10 – 15 |
Symptoms
- The motorcycle doesn’t respond when the start button is pressed.
- Dim or flickering headlight, indicating electrical issues.
- General reluctance of the engine to turn over or fire up.
Possible Causes
- Fuel system blockages or contamination.
- Electrical connections that are loose, corroded, or otherwise compromised.
- Battery, starter relay, or ignition system malfunctions.
Detailed Solutions and Tips
- Checking and Cleaning Fuel Filter
- Steps:
- Locate the fuel filter near the gas tank outlet.
- Carefully remove the filter. Use gloves to avoid fuel contact.
- Inspect the filter for debris or clogging.
- Clean the filter screen gently with a soft brush and petrol.
- Reinstall the filter, ensuring all connections are tight.
- Handy Tips: Consider using a magnifying glass to inspect for tiny particles. If the filter looks damaged, replace it instead of cleaning.
- Expert Insight: A clogged fuel filter can starve the engine of fuel, leading to starting issues. Regular checks can prevent this.
- Steps:
- Using Ethanol-Free Gas and Seafoam
- Steps:
- Drain any old or questionable fuel from the tank.
- Fill the tank with high-quality, ethanol-free gas.
- Add the recommended amount of Seafoam to the fuel.
- Let the bike idle or take a short ride to circulate the mixture.
- Handy Tips: If your area doesn’t have ethanol-free gas, use a fuel stabilizer designed for ethanol-blended fuels.
- Expert Insight: Ethanol can absorb moisture, leading to corrosion and fuel system issues. Ethanol-free gas prevents this.
- Steps:
- Regular Riding
- Steps:
- Plan for at least a weekly ride, ideally for more than 30 minutes.
- Ensure the bike reaches operating temperature during each ride.
- Handy Tips: If you can’t ride regularly, consider using a motorcycle stand to run the bike stationary.
- Expert Insight: Regular use keeps the battery charged and the fuel system clean, reducing starting issues.
- Steps:
- Battery and Cable Check
- Steps:
- Remove the seat or side panel to access the battery.
- Inspect the terminals for any signs of corrosion or looseness.
- Clean the terminals with a wire brush and apply terminal grease.
- Check the cables for wear or damage, replacing if necessary.
- Handy Tips: Use a multimeter to check the battery voltage. Anything below 12.6 volts indicates a weak battery.
- Expert Insight: A healthy battery is crucial for starting. Regular checks can prevent unexpected failures.
- Steps:
- Starter Relay Testing
- Steps:
- Locate the starter relay, usually near the battery.
- Use insulated jumper cables to connect the relay’s large terminals.
- Try starting the bike. If it starts, the relay is likely the issue.
- Handy Tips: Be cautious when jumping the relay to avoid short circuits.
- Expert Insight: A faulty relay can prevent power from reaching the starter motor, a common cause of starting issues.
- Steps:
- Ignition Fuse Check
- Steps:
- Find the fuse box, often under the seat or a side panel.
- Identify and inspect the ignition fuse for any signs of damage.
- Replace the fuse if it’s blown. Consider carrying spare fuses.
- Handy Tips: Gently wiggle the fuse in its holder to ensure a good connection.
- Expert Insight: Fuses are the first line of defense against electrical overloads. Regular checks can prevent unexpected issues.
- Steps:
Golf cart models where this worked
- Honda Shadow 600 (Various Years)