KTM 50 SX Factory Specs (Top Speed | Horsepower | Weight)

The KTM 50 SX Factory motorcycle specifications include a 49.8 cc (3.04 cu in) engine, an automatic gearbox, and a listed weight of 41.5 kg (91.5 lb).

Key specifications

2021-2023Model years
50 ccDisplacement
41.5 kgDry weight
665 mmSeat height
2.3 LFuel tank
252 mmGround clearance
Model years covered
202120222023
Year-specific specification changes

The 2021 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Displacement
2022202349 cc (2.99 cu in)
Frame
202225CrMo4 steel central-tube frame
2023Chrome-molybdenum steel central-tube frame
Rear suspension
2023XACT WP PDS mono shock
Ignition
2022Seletra 2p D36
Rear wheel travel
2022180 mm (7.1 inches)

How the KTM 50 SX Factory compares

This compares the motorcycle with all KTM models in this specifications database. The blue marker is this model and the grey line is the KTM database average.

Displacement50 cc
Low 49 ccAverage 444 ccHigh 1,301 cc

About 89% lower than the KTM database average. Around the 5th percentile across KTM models.

Seat height665 mm
Low 607 mmAverage 895 mmHigh 992 mm

About 26% lower than the KTM database average. Around the 4th percentile across KTM models.

Fuel capacity2.3 L
Low 2 LAverage 10.6 LHigh 23 L

About 78% smaller than the KTM database average. Around the 5th percentile across KTM models.

This model KTM database average

KTM database percentile rankings

Percentiles show where this motorcycle sits across the KTM specifications database. They are descriptive database rankings, not performance ratings.

Displacement5th

50 cc — larger displacement than about 5% of KTM models.

Seat height4th

665 mm — taller than about 4% of KTM models.

Fuel capacity5th

2.3 L — larger than about 5% of KTM fuel tanks in this database.

Dimensions compared with KTM average

Each measurement is compared with the average value across KTM models where that dimension is available.

Seat height665 mm
This bike

665

KTM avg

895

26% below average.

Ground clearance252 mm
This bike

252

KTM avg

304

17% below average.

Mechanical overview

Engine layout snapshot

Single cylinder, two-stroke • 50 cc
Chassis snapshot

Seat 665 mmClearance 252 mm
Automatic • Chain (final drive)

Additional useful specifications

Bore/stroke ratio 0.99:1 (Square)

Model information

Category Minibike, cross

Engine specifications

Engine type Single cylinder, two-stroke
Displacement 49.8 cc (3.04 cu in)
Bore × stroke 39.5 x 40 mm (1.6 x 1.6 inches)
Fuel control Double Overhead Cams/Twin Cam (DOHC)
Ignition Seletra 2p D36 EMS
Starter Kick

Transmission and drivetrain

Gearbox Automatic
Final drive Chain (final drive)
Clutch Centrifugal

Chassis and suspension

Frame Central-tube frame with double-cradle
Front suspension XACT 35 WP Upside-Down fork, Ø 35 mm
Rear suspension XACT WP mono shock
Front wheel travel 205 mm (8.1 inches)
Rear wheel travel 185 mm (7.3 inches)
Rake 24.0°

Brakes, wheels and tires

Front brakes Single disc
Rear brakes Single disc
Wheels Dunlop Geomax MX 53 tires

Dimensions and weight

Dry weight 41.5 kg (91.5 lb)
Seat height 665 mm (26.2 inches)
Ground clearance 252 mm (9.9 inches)

Fuel and emissions

Fuel capacity 2.30 L (0.61 US gal)

Other specifications

Color options White/Orange/Blue/Red
Exhaust system FMF silencer
Price as new US$ 5199. MSRP depends on country, taxes, accessories, etc.

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from KTM models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official KTM information before relying on them. Visit the official KTM website.