For the 2020 model year, the Kawasaki Rouser RS200 motorcycle has a listed dry weight of 363.8 lb (165 kg).
Kawasaki Rouser RS200 weight overview
This is middleweight territory: substantial enough to feel planted, but still well short of heavyweight touring and large-cruiser mass. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Middleweight Motorcycle
How heavy is the Kawasaki Rouser RS200?
dry weight
Using a model-level dry weight comparison, the Kawasaki Rouser RS200 is lighter than about 69% of 21 Kawasaki sport bikes with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Kawasaki Rouser RS200 weight & related specs
| Model years covered | 2020 |
|---|---|
| Dry weight | 363.8 lb (165 kg) |
| Engine displacement | 199.5 cc |
| Power | 24.1 hp |
| Torque | 13.7 lb-ft (18.6 Nm) |
| Fuel capacity | 3.43 US gal (13 L) |
| Full-tank fuel weight (estimated) | 21.4 lb (9.7 kg) |
Useful weight calculations
| Horsepower per 100 lb | 6.63 hp / 100 lb |
|---|---|
| Pounds per horsepower | 15.09 lb / hp |
| Torque per 100 lb | 3.77 lb-ft / 100 lb |
| Displacement per pound | 0.55 cc / lb |
| Weight per 100 cc | 182.3 lb / 100 cc |
| Fuel weight as % of bike weight | 5.9% |
| Weight with full tank | 385.1 lb (174.7 kg) |
What the weight numbers tell you
Kawasaki Rouser RS200 weight FAQ
How much does the Kawasaki Rouser RS200 weigh?
The source data gives 363.8 lb (165 kg) as dry weight. A fueled, road-ready bike will weigh more than this figure.
How does the Kawasaki Rouser RS200 weight compare with similar Kawasakis?
Relatively light. On a model-level comparison, it is lighter than about 69% of 21 Kawasaki sport bikes with the same weight basis.
What does a full tank of gas weigh on the Kawasaki Rouser RS200?
A full tank works out to about 21.4 lb (9.7 kg) from the listed 3.43 US gal (13 L) capacity. Actual fuel density varies slightly, so treat it as a practical estimate.
What does the Kawasaki Rouser RS200 weigh with a 180 lb rider?
The approximate combined total is 543.8 lb (246.6 kg) with a 180 lb rider, based on the representative dry weight used on this page.
Is the Kawasaki Rouser RS200 strong for its weight?
The calculated range is 6.63 hp per 100 lb. This ratio is usually more informative for acceleration comparisons than horsepower alone.
How much heavier will the Kawasaki Rouser RS200 be than its dry weight?
Do not treat dry weight as curb weight. Adding the listed fuel capacity alone produces roughly 385.1 lb (174.7 kg); the true ready-to-ride figure can still differ because dry-weight definitions vary.
What is the estimated Kawasaki Rouser RS200 weight with a full tank of gas?
Filling the listed tank brings the calculated bike weight to roughly 385.1 lb (174.7 kg). This estimate is most useful when no official wet/running figure is available.
How much of the Kawasaki Rouser RS200 total weight comes from fuel?
Fuel accounts for roughly 5.9% of the available motorcycle weight figure. On lighter bikes that share can be surprisingly noticeable.
How does Kawasaki Rouser RS200 torque compare with its weight?
Available data gives 3.77 lb-ft per 100 lb. That ratio helps explain how strong the engine is relative to the bike’s mass, especially at lower speeds.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Kawasaki website.