The Kawasaki Ninja ZX-10 R motorcycle dimensions for 2005-2006 is width 27.8 in (706 mm), height 43.9 in (1,115 mm), wheelbase 54.5 in (1,384 mm) to 54.7 in (1,389 mm), seat height 32.5 in (826 mm), and the ground clearance is 4.9 in (124 mm).
Kawasaki Ninja ZX-10 R dimensions at a glance
Dimension charts
Position within similar Kawasaki models
Representative dimensions shown within the observed range for comparable Kawasaki models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Kawasaki model group.
Dimension changes by model year
The earliest supplied value is the baseline. Only later values that actually change are shown.
Wheelbase
Useful dimension ratios
Seat height feel
About 32.5 in — a higher-than-typical seat height. This is a geometry comparison, not a guarantee of rider fit.
Clearance / wheelbase
9%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Kawasaki models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Width | 27.8 in (706 mm) | 29.1 in (740 mm) | 1.3 in below median |
| Height | 43.9 in (1,115 mm) | 45.1 in (1,146 mm) | 1.2 in below median |
| Wheelbase | 54.6 in (1,386 mm) | 55.5 in (1,410 mm) | 0.9 in below median |
| Seat height | 32.5 in (826 mm) | 31.5 in (800 mm) | 1 in above median |
| Ground clearance | 4.9 in (124 mm) | 5.1 in (130 mm) | 0.2 in below median |
Kawasaki Ninja ZX-10 R dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2005 | — | 27.8 in (706 mm) | 43.9 in (1,115 mm) | 54.5 in (1,384 mm) | 32.5 in (826 mm) | 4.9 in (124 mm) |
| 2006 | — | — | — | 54.7 in (1,389 mm) | 32.5 in (826 mm) | — |
Kawasaki Ninja ZX-10 R dimensions FAQ
Is the Kawasaki Ninja ZX-10 R seat height low or tall?
The representative seat height is 32.5 in (826 mm), which is a higher-than-typical seat height. 1 in above the category median.
Does the Kawasaki Ninja ZX-10 R have a short or long wheelbase?
The representative wheelbase is 54.6 in (1,386 mm), giving the Kawasaki Ninja ZX-10 R a very short wheelbase for its category. 0.9 in below the category median.
How much ground clearance does the Kawasaki Ninja ZX-10 R have?
The representative ground clearance is 4.9 in (124 mm), which is very low ground clearance for its category. 0.2 in below the category median.
What do the Kawasaki Ninja ZX-10 R width and height suggest?
Its representative width is 27.8 in (706 mm) and representative height is 43.9 in (1,115 mm). The width is very narrow for its category. The height is lower than most comparable Kawasaki models.
Did the Kawasaki Ninja ZX-10 R dimensions change much by year?
The biggest supplied shift is in wheelbase: increased from 54.5 in (1,384 mm) in 2005 to 54.7 in (1,389 mm) in 2006, a change of 0.2 in. Check the year-by-year section above for the full breakdown.
What is the main dimension takeaway for the Kawasaki Ninja ZX-10 R?
The main listed figures are wheelbase 54.6 in (1,386 mm), seat height 32.5 in (826 mm), and ground clearance 4.9 in (124 mm). Its clearance-to-wheelbase ratio is about 9%, which is a simple way to relate ground clearance to the bike’s axle spacing.