The Honda Vision 50 motorcycle specifications include a 49 cc (2.99 cu in) engine and a listed weight of 100 kg (220.5 lb).
Key specifications
The 2012 model is treated as the standard specification. Only later model years with a different supplied value are shown below.
How the Honda Vision 50 compares
This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.
About 91% lower than the Honda database average. Around the 3rd percentile across Honda models.
About 49% lighter than the Honda database average. Around the 9th percentile across Honda models.
About 59% smaller than the Honda database average. Around the 12th percentile across Honda models.
Honda database percentile rankings
Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.
49 cc — larger displacement than about 3% of Honda models.
100 kg — heavier than about 9% of Honda models, or lighter than about 91%.
5.5 L — larger than about 12% of Honda fuel tanks in this database.
Dimensions compared with Honda average
Each measurement is compared with the average value across Honda models where that dimension is available.
1,702
2,078
18% below average.
1,117
1,161
4% below average.
1,284
1,431
10% below average.
Mechanical overview
Additional useful specifications
| Bore/stroke ratio | 1.00:1 (Square) |
|---|
Engine specifications
| Engine type | Single cylinder, four-stroke |
|---|---|
| Displacement | 49 cc (2.99 cu in) |
| Torque | 3.5 Nm (0.4 kgf-m or 2.6 ft.lbs) @ 6,750 rpm |
| Bore × stroke | 37.8 x 37.8 mm (1.5 x 1.5 inches) |
| Compression ratio | 10.0:1 |
| Cooling system | Air |
| Fuel system | Injection |
| Fuel control | Overhead Cams (OHC) |
| Ignition | Full-transistor battery ignition |
| Starter | Electric |
Transmission and drivetrain
| Final drive | Belt (final drive) |
|---|
Chassis and suspension
| Frame | Underbone; steel tube |
|---|---|
| Front suspension | Telescopic forks with hydraulic damping |
| Rear suspension | Unit swingarm |
Brakes, wheels and tires
| Front brakes | Single disc |
|---|---|
| Rear brakes | Expanding brake (drum brake) |
| Wheels | Cast aluminium MT1.85 |
Dimensions and weight
| Wet weight | 100 kg (220.5 lb) |
|---|---|
| Overall length | 1,702 mm (67.0 inches) |
| Overall height | 1,117 mm (44.0 inches) |
| Wheelbase | 1,284 mm (50.6 inches) |
Fuel and emissions
| Fuel capacity | 5.50 L (1.45 US gal) |
|---|
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.