The Honda SH125i Special motorcycle dimensions for 2011-2012 is length 79.7 in (2,025 mm), width 28.7 in (728 mm), height 44.9 in (1,140 mm) to 48.4 in (1,230 mm), wheelbase 52.6 in (1,335 mm), seat height 30.9 in (785 mm), and the ground clearance is 5.9 in (149 mm).
Honda SH125i Special dimensions at a glance
Dimension charts
Position within similar Honda models
Representative dimensions shown within the observed range for comparable Honda models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Honda model group.
Dimension changes by model year
The earliest supplied value is the baseline. Only later values that actually change are shown.
Overall height
Useful dimension ratios
Seat height feel
About 30.9 in — a seat height around the category middle. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
65.9% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 27.2 in (690 mm) combined beyond the axle-to-axle distance.
Bounding-box footprint
About 15.9 sq ft (1.47 m²), calculated from listed overall length × width. Useful for rough storage planning.
Clearance / wheelbase
11.2%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Honda models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 79.7 in (2,025 mm) | 82.7 in (2,100 mm) | 3 in below median |
| Width | 28.7 in (728 mm) | 30.5 in (776 mm) | 1.9 in below median |
| Height | 46.7 in (1,185 mm) | 44.9 in (1,140 mm) | 1.8 in above median |
| Wheelbase | 52.6 in (1,335 mm) | 57.5 in (1,460 mm) | 4.9 in below median |
| Seat height | 30.9 in (785 mm) | 30.7 in (780 mm) | 0.2 in above median |
| Ground clearance | 5.9 in (149 mm) | 5.7 in (145 mm) | 0.2 in above median |
Honda SH125i Special dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2011 | 79.7 in (2,025 mm) | 28.7 in (728 mm) | 48.4 in (1,230 mm) | 52.6 in (1,335 mm) | 30.9 in (785 mm) | — |
| 2012 | 79.7 in (2,025 mm) | 28.7 in (728 mm) | 44.9 in (1,140 mm) | 52.6 in (1,335 mm) | 30.9 in (785 mm) | 5.9 in (149 mm) |
Honda SH125i Special dimensions FAQ
Is the Honda SH125i Special seat height low or tall?
The representative seat height is 30.9 in (785 mm), which is a seat height around the category middle. 0.2 in above the category median.
Does the Honda SH125i Special have a short or long wheelbase?
The representative wheelbase is 52.6 in (1,335 mm), giving the Honda SH125i Special a shorter-than-typical wheelbase. 4.9 in below the category median. The wheelbase is about 65.9% of overall length.
How much ground clearance does the Honda SH125i Special have?
The representative ground clearance is 5.9 in (149 mm), which is ground clearance around the category middle. 0.2 in above the category median.
Is the Honda SH125i Special compact or large?
The representative overall length is 79.7 in (2,025 mm), making the Honda SH125i Special shorter than most comparable Honda models. 3 in below the category median. Its rough length × width storage footprint is about 15.9 sq ft (1.47 m²).
What do the Honda SH125i Special width and height suggest?
Its representative width is 28.7 in (728 mm) and representative height is 46.7 in (1,185 mm). The width is narrower than most comparable Honda models. The height is taller than most comparable Honda models.
Did the Honda SH125i Special dimensions change much by year?
The biggest supplied shift is in overall height: decreased from 48.4 in (1,230 mm) in 2011 to 44.9 in (1,140 mm) in 2012, a change of 3.5 in. Check the year-by-year section above for the full breakdown.