Honda SH 150i Specs (Top Speed | Horsepower | Weight)

The Honda SH 150i motorcycle specifications include a 153 cc (9.34 cu in) engine and a listed weight of 127 kg (280 lb).

Key specifications

2006Year released
153 ccDisplacement
13.4 Nm @ 7,000 rpmTorque
127 kgDry weight
790 mmSeat height
7.5 LFuel tank
1,335 mmWheelbase
149 mmGround clearance

How the Honda SH 150i compares

This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.

Displacement153 cc
Low 49 ccAverage 563 ccHigh 1,832 cc

About 73% lower than the Honda database average. Around the 24th percentile across Honda models.

Seat height790 mm
Low 650 mmAverage 780 mmHigh 960 mm

Very close to the Honda database average. Around the 58th percentile across Honda models.

Fuel capacity7.5 L
Low 3.7 LAverage 13.5 LHigh 25 L

About 44% smaller than the Honda database average. Around the 20th percentile across Honda models.

This model Honda database average

Honda database percentile rankings

Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.

Displacement24th

153 cc — larger displacement than about 24% of Honda models.

Seat height58th

790 mm — taller than about 58% of Honda models.

Fuel capacity20th

7.5 L — larger than about 20% of Honda fuel tanks in this database.

Dimensions compared with Honda average

Each measurement is compared with the average value across Honda models where that dimension is available.

Wheelbase1,335 mm
This bike

1,335

Honda avg

1,431

7% below average.

Seat height790 mm
This bike

790

Honda avg

780

Close to average.

Ground clearance149 mm
This bike

149

Honda avg

184

19% below average.

Mechanical overview

Engine layout snapshot

Single cylinder, four-stroke • 153 cc • Liquid cooled
Chassis snapshot

Wheelbase 1,335 mmSeat 790 mmClearance 149 mm
Belt (final drive)

Additional useful specifications

Bore/stroke ratio 1.00:1 (Square)

Model information

Year released 2006

Engine specifications

Engine type Single cylinder, four-stroke
Displacement 153 cc (9.34 cu in)
Torque 13.4 Nm (1.4 kgf-m or 9.9 ft.lbs) @ 7,000 rpm
Bore × stroke 58.0 x 57.8 mm (2.3 x 2.3 inches)
Compression ratio 11.0:1
Cooling system Liquid
Fuel system Injection. PGM-FI electronic fuel injection
Fuel control Single Overhead Cams (SOHC)
Ignition Digital transistorised with electronic advance
Starter Electric

Transmission and drivetrain

Final drive Belt (final drive)
Clutch Automatic; centrifugal

Chassis and suspension

Trail 84 mm (3.3 inches)

Brakes, wheels and tires

Front brakes Single disc
Rear brakes Expanding brake (drum brake)

Dimensions and weight

Dry weight 127 kg (280 lb)
Seat height 790 mm (31.1 inches)
Wheelbase 1,335 mm (52.6 inches)
Ground clearance 149 mm (5.9 inches)

Fuel and emissions

Fuel capacity 7.50 L (1.98 US gal)

Performance

Power/weight ratio 0.1224 hp/kg

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.