Honda S-WING 150 Specs (Top Speed | Horsepower | Weight)

The Honda S-WING 150 motorcycle specifications include a 150 cc (9.15 cu in) engine, a 4-speed gearbox, and a listed weight of 157 kg (346.1 lb).

Key specifications

2008Year released
150 ccDisplacement
157 kgDry weight
776 mmSeat height
9.4 LFuel tank
1,490 mmWheelbase
134 mmGround clearance

How the Honda S-WING 150 compares

This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.

Displacement150 cc
Low 49 ccAverage 563 ccHigh 1,832 cc

About 73% lower than the Honda database average. Around the 23rd percentile across Honda models.

Seat height776 mm
Low 650 mmAverage 780 mmHigh 960 mm

Very close to the Honda database average. Around the 45th percentile across Honda models.

Fuel capacity9.4 L
Low 3.7 LAverage 13.5 LHigh 25 L

About 30% smaller than the Honda database average. Around the 28th percentile across Honda models.

This model Honda database average

Honda database percentile rankings

Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.

Displacement23rd

150 cc — larger displacement than about 23% of Honda models.

Seat height45th

776 mm — taller than about 45% of Honda models.

Fuel capacity28th

9.4 L — larger than about 28% of Honda fuel tanks in this database.

Dimensions compared with Honda average

Each measurement is compared with the average value across Honda models where that dimension is available.

Overall length2,090 mm
This bike

2,090

Honda avg

2,078

Close to average.

Wheelbase1,490 mm
This bike

1,490

Honda avg

1,431

4% above average.

Seat height776 mm
This bike

776

Honda avg

780

Close to average.

Ground clearance134 mm
This bike

134

Honda avg

184

27% below average.

Mechanical overview

Engine layout snapshot

Single cylinder, four-stroke • 150 cc • Liquid cooled
Chassis snapshot

Wheelbase 1,490 mmSeat 776 mmClearance 134 mm
4-speed • Belt (final drive)

Model information

Year released 2008
Category Scooter

Engine specifications

Engine type Single cylinder, four-stroke
Displacement 150 cc (9.15 cu in)
Compression ratio 11.0:1
Cooling system Liquid
Fuel system Injection. PGM-FI electronic fuel injection
Fuel control Single Overhead Cams (SOHC)
Ignition Digital transistorised with electronic advance

Transmission and drivetrain

Gearbox 4-speed
Final drive Belt (final drive)

Chassis and suspension

Front suspension 33mm telescopic fork, 85.7mm axle travel
Rear suspension Dual-damper unit swingarm, 98.1mm axle travel

Brakes, wheels and tires

Front brakes Single disc
Rear brakes Single disc

Dimensions and weight

Dry weight 157 kg (346.1 lb)
Seat height 776 mm (30.6 inches)
Overall length 2,090 mm (82.3 inches)
Wheelbase 1,490 mm (58.7 inches)
Ground clearance 134 mm (5.3 inches)

Fuel and emissions

Fuel capacity 9.40 L (2.48 US gal)

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.