Honda PS125i Sporty Specs (Top Speed | Horsepower | Weight)

The Honda PS125i Sporty motorcycle specifications include a 125 cc (7.63 cu in) engine, a 4-speed gearbox, and a listed weight of 156 kg (343.9 lb).

Key specifications

2011Year released
125 ccDisplacement
11.1 Nm @ 7,500 rpmTorque
156 kgDry weight
776 mmSeat height
9.4 LFuel tank
1,490 mmWheelbase
134 mmGround clearance

How the Honda PS125i Sporty compares

This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.

Displacement125 cc
Low 49 ccAverage 563 ccHigh 1,832 cc

About 78% lower than the Honda database average. Around the 20th percentile across Honda models.

Seat height776 mm
Low 650 mmAverage 780 mmHigh 960 mm

Very close to the Honda database average. Around the 45th percentile across Honda models.

Fuel capacity9.4 L
Low 3.7 LAverage 13.5 LHigh 25 L

About 30% smaller than the Honda database average. Around the 28th percentile across Honda models.

This model Honda database average

Honda database percentile rankings

Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.

Displacement20th

125 cc — larger displacement than about 20% of Honda models.

Seat height45th

776 mm — taller than about 45% of Honda models.

Fuel capacity28th

9.4 L — larger than about 28% of Honda fuel tanks in this database.

Dimensions compared with Honda average

Each measurement is compared with the average value across Honda models where that dimension is available.

Overall length2,090 mm
This bike

2,090

Honda avg

2,078

Close to average.

Overall width745 mm
This bike

745

Honda avg

827

10% below average.

Overall height1,435 mm
This bike

1,435

Honda avg

1,161

24% above average.

Wheelbase1,490 mm
This bike

1,490

Honda avg

1,431

4% above average.

Seat height776 mm
This bike

776

Honda avg

780

Close to average.

Ground clearance134 mm
This bike

134

Honda avg

184

27% below average.

Mechanical overview

Engine layout snapshot

Single cylinder, four-stroke • 125 cc • Liquid cooled
Chassis snapshot

Wheelbase 1,490 mmSeat 776 mmClearance 134 mm
4-speed • Belt (final drive)

Additional useful specifications

Bore/stroke ratio 0.91:1 (Undersquare)

Model information

Year released 2011
Category Scooter

Engine specifications

Engine type Single cylinder, four-stroke
Displacement 125 cc (7.63 cu in)
Torque 11.1 Nm (1.1 kgf-m or 8.2 ft.lbs) @ 7,500 rpm
Bore × stroke 52.4 x 57.8 mm (2.1 x 2.3 inches)
Compression ratio 11.0:1
Cooling system Liquid
Fuel system Injection. PGM-FI
Fuel control Single Overhead Cams (SOHC)
Ignition Digital transistorised with electronic advanced
Starter Electric

Transmission and drivetrain

Gearbox 4-speed
Final drive Belt (final drive)

Chassis and suspension

Front suspension 33mm telescopic fork, 85.7mm axle travel
Rear suspension Dual-damper unit swingarm, 98.1mm axle travel

Brakes, wheels and tires

Front brakes Single disc
Rear brakes Expanding brake (drum brake)
Wheels U-section 6-spoke cast aluminium

Dimensions and weight

Dry weight 156 kg (343.9 lb)
Seat height 776 mm (30.6 inches)
Overall length 2,090 mm (82.3 inches)
Overall width 745 mm (29.3 inches)
Overall height 1,435 mm (56.5 inches)
Wheelbase 1,490 mm (58.7 inches)
Ground clearance 134 mm (5.3 inches)

Fuel and emissions

Fuel capacity 9.40 L (2.48 US gal)

Performance

Power/weight ratio 0.0834 hp/kg

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.