Honda PS 125i Specs (Top Speed | Horsepower | Weight)

The Honda PS 125i motorcycle specifications include a 125 cc (7.63 cu in) engine, a 4-speed gearbox, and a listed weight of 120 kg (264.6 lb).

Key specifications

2006Year released
125 ccDisplacement
14.2 Nm @ 7,000 rpmTorque
120 kgDry weight
800 mmSeat height
9 LFuel tank
1,330 mmWheelbase
115 mmGround clearance

How the Honda PS 125i compares

This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.

Displacement125 cc
Low 49 ccAverage 563 ccHigh 1,832 cc

About 78% lower than the Honda database average. Around the 20th percentile across Honda models.

Seat height800 mm
Low 650 mmAverage 780 mmHigh 960 mm

Very close to the Honda database average. Around the 66th percentile across Honda models.

Fuel capacity9 L
Low 3.7 LAverage 13.5 LHigh 25 L

About 33% smaller than the Honda database average. Around the 27th percentile across Honda models.

This model Honda database average

Honda database percentile rankings

Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.

Displacement20th

125 cc — larger displacement than about 20% of Honda models.

Seat height66th

800 mm — taller than about 66% of Honda models.

Fuel capacity27th

9 L — larger than about 27% of Honda fuel tanks in this database.

Dimensions compared with Honda average

Each measurement is compared with the average value across Honda models where that dimension is available.

Wheelbase1,330 mm
This bike

1,330

Honda avg

1,431

7% below average.

Seat height800 mm
This bike

800

Honda avg

780

Close to average.

Ground clearance115 mm
This bike

115

Honda avg

184

37% below average.

Mechanical overview

Engine layout snapshot

Single cylinder, four-stroke • 125 cc • Liquid cooled
Chassis snapshot

Wheelbase 1,330 mmSeat 800 mmClearance 115 mm
4-speed • Belt (final drive)

Additional useful specifications

Bore/stroke ratio 0.91:1 (Undersquare)

Model information

Year released 2006
Category Scooter

Engine specifications

Engine type Single cylinder, four-stroke
Displacement 125 cc (7.63 cu in)
Torque 14.2 Nm (1.4 kgf-m or 10.5 ft.lbs) @ 7,000 rpm
Bore × stroke 52.4 x 57.8 mm (2.1 x 2.3 inches)
Compression ratio 11.0:1
Cooling system Liquid
Fuel system Injection. PGM-FI electronic fuel injection
Fuel control Single Overhead Cams (SOHC)
Ignition Digital transistorised with electronic advance
Starter Electric

Transmission and drivetrain

Gearbox 4-speed
Final drive Belt (final drive)
Clutch Automatic; centrifugal

Chassis and suspension

Trail 83 mm (3.2 inches)

Brakes, wheels and tires

Front brakes Single disc
Rear brakes Expanding brake (drum brake)

Dimensions and weight

Dry weight 120 kg (264.6 lb)
Seat height 800 mm (31.5 inches)
Wheelbase 1,330 mm (52.4 inches)
Ground clearance 115 mm (4.5 inches)

Fuel and emissions

Fuel capacity 9.00 L (2.38 US gal)

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.