The Honda Montesa Race Replica motorcycle dimensions for 2017 is length 79.4 in (2,016 mm), width 32.7 in (830 mm), height 44.9 in (1,140 mm), wheelbase 52 in (1,321 mm), seat height 25.6 in (650 mm), and the ground clearance is 13.2 in (335 mm).
Honda Montesa Race Replica dimensions at a glance
Dimension charts
Position within similar Honda models
Representative dimensions shown within the observed range for comparable Honda models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Honda model group.
Useful dimension ratios
Seat height feel
About 25.6 in — a very low seat height for its category. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
65.5% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 27.4 in (695 mm) combined beyond the axle-to-axle distance.
Bounding-box footprint
About 18 sq ft (1.67 m²), calculated from listed overall length × width. Useful for rough storage planning.
Clearance / wheelbase
25.4%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Honda models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 79.4 in (2,016 mm) | 79.4 in (2,016 mm) | About the same as median |
| Width | 32.7 in (830 mm) | 32.7 in (830 mm) | About the same as median |
| Height | 44.9 in (1,140 mm) | 44.9 in (1,140 mm) | About the same as median |
| Wheelbase | 52 in (1,321 mm) | 52 in (1,321 mm) | About the same as median |
| Seat height | 25.6 in (650 mm) | 26.7 in (678 mm) | 1.1 in below median |
| Ground clearance | 13.2 in (335 mm) | 12.9 in (328 mm) | 0.3 in above median |
Honda Montesa Race Replica dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2017 | 79.4 in (2,016 mm) | 32.7 in (830 mm) | 44.9 in (1,140 mm) | 52 in (1,321 mm) | 25.6 in (650 mm) | 13.2 in (335 mm) |
Honda Montesa Race Replica dimensions FAQ
Is the Honda Montesa Race Replica seat height low or tall?
The representative seat height is 25.6 in (650 mm), which is a very low seat height for its category. 1.1 in below the category median.
Does the Honda Montesa Race Replica have a short or long wheelbase?
The representative wheelbase is 52 in (1,321 mm), giving the Honda Montesa Race Replica a wheelbase around the category middle. About the same as the category median. The wheelbase is about 65.5% of overall length.
How much ground clearance does the Honda Montesa Race Replica have?
The representative ground clearance is 13.2 in (335 mm), which is among the highest ground-clearance figures in its category. 0.3 in above the category median.
Is the Honda Montesa Race Replica compact or large?
The representative overall length is 79.4 in (2,016 mm), making the Honda Montesa Race Replica shorter than most comparable Honda models. About the same as the category median. Its rough length × width storage footprint is about 18 sq ft (1.67 m²).
What do the Honda Montesa Race Replica width and height suggest?
Its representative width is 32.7 in (830 mm) and representative height is 44.9 in (1,140 mm). The width is narrower than most comparable Honda models. The height is around typical category height.
What is the main dimension takeaway for the Honda Montesa Race Replica?
The main listed figures are overall length 79.4 in (2,016 mm), wheelbase 52 in (1,321 mm), seat height 25.6 in (650 mm), and ground clearance 13.2 in (335 mm). Its clearance-to-wheelbase ratio is about 25.4%, which is a simple way to relate ground clearance to the bike’s axle spacing.