The Honda Lead motorcycle dimensions for 2008-2009 is length 72.2 in (1,835 mm), width 26.2 in (665 mm), height 42.9 in (1,090 mm) to 44.3 in (1,125 mm), wheelbase 50.2 in (1,275 mm), seat height 29.1 in (740 mm), and the ground clearance is 4.1 in (105 mm).
Honda Lead dimensions at a glance
Dimension charts
Position within similar Honda models
Representative dimensions shown within the observed range for comparable Honda models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Honda model group.
Dimension changes by model year
The earliest supplied value is the baseline. Only later values that actually change are shown.
Overall height
Useful dimension ratios
Seat height feel
About 29.1 in — a lower-than-typical seat height. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
69.5% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 22 in (560 mm) combined beyond the axle-to-axle distance.
Bounding-box footprint
About 13.1 sq ft (1.22 m²), calculated from listed overall length × width. Useful for rough storage planning.
Clearance / wheelbase
8.2%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Honda models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 72.2 in (1,835 mm) | 75.5 in (1,918 mm) | 3.2 in below median |
| Width | 26.2 in (665 mm) | 28.4 in (721 mm) | 2.2 in below median |
| Height | 43.6 in (1,108 mm) | 43.9 in (1,116 mm) | 0.3 in below median |
| Wheelbase | 50.2 in (1,275 mm) | 51.3 in (1,302 mm) | 1.1 in below median |
| Seat height | 29.1 in (740 mm) | 29.9 in (760 mm) | 0.8 in below median |
| Ground clearance | 4.1 in (105 mm) | 5.3 in (135 mm) | 1.2 in below median |
Honda Lead dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2008 | 72.2 in (1,835 mm) | — | 42.9 in (1,090 mm) | — | — | — |
| 2009 | 72.2 in (1,835 mm) | 26.2 in (665 mm) | 44.3 in (1,125 mm) | 50.2 in (1,275 mm) | 29.1 in (740 mm) | 4.1 in (105 mm) |
Honda Lead dimensions FAQ
Is the Honda Lead seat height low or tall?
The representative seat height is 29.1 in (740 mm), which is a lower-than-typical seat height. 0.8 in below the category median.
Does the Honda Lead have a short or long wheelbase?
The representative wheelbase is 50.2 in (1,275 mm), giving the Honda Lead a wheelbase around the category middle. 1.1 in below the category median. The wheelbase is about 69.5% of overall length.
How much ground clearance does the Honda Lead have?
The representative ground clearance is 4.1 in (105 mm), which is very low ground clearance for its category. 1.2 in below the category median.
Is the Honda Lead compact or large?
The representative overall length is 72.2 in (1,835 mm), making the Honda Lead shorter than most comparable Honda models. 3.2 in below the category median. Its rough length × width storage footprint is about 13.1 sq ft (1.22 m²).
What do the Honda Lead width and height suggest?
Its representative width is 26.2 in (665 mm) and representative height is 43.6 in (1,108 mm). The width is very narrow for its category. The height is around typical category height.
Did the Honda Lead dimensions change much by year?
The biggest supplied shift is in overall height: increased from 42.9 in (1,090 mm) in 2008 to 44.3 in (1,125 mm) in 2009, a change of 1.4 in. Check the year-by-year section above for the full breakdown.