The Honda FTR motorcycle dimensions for 2002-2016 is length 81.9 in (2,080 mm), width 35.8 in (910 mm) to 36.2 in (919 mm), height 43.9 in (1,115 mm) to 45.3 in (1,150 mm), wheelbase 54.9 in (1,395 mm), seat height 30.7 in (780 mm), and the ground clearance is 6.9 in (175 mm) to 7.1 in (180 mm).
Honda FTR dimensions at a glance
Dimension charts
Position within similar Honda models
Representative dimensions shown within the observed range for comparable Honda models in the same category.
Compared with the category median
Percentile and median comparisons use the same comparable Honda model group.
Dimension changes by model year
The earliest supplied value is the baseline. Only later values that actually change are shown.
Overall width
Overall height
Ground clearance
Useful dimension ratios
Seat height feel
About 30.7 in — a lower-than-typical seat height. This is a geometry comparison, not a guarantee of rider fit.
Wheelbase / length
67.1% of overall length. This shows how much of the bike’s total length is axle-to-axle distance rather than overhang.
Length beyond wheelbase
About 27 in (685 mm) combined beyond the axle-to-axle distance.
Bounding-box footprint
About 20.6 sq ft (1.91 m²), calculated from listed overall length × width. Useful for rough storage planning.
Clearance / wheelbase
12.5%. A simple ratio showing listed ground clearance relative to wheelbase.
How its dimensions compare
Compared with other Honda models in the same Bikez category where enough usable data is available.
| Dimension | This model | Category median | Difference |
|---|---|---|---|
| Overall length | 81.9 in (2,080 mm) | 82.3 in (2,090 mm) | 0.4 in below median |
| Width | 36.2 in (919 mm) | 30.1 in (765 mm) | 6.1 in above median |
| Height | 44.6 in (1,132 mm) | 43.1 in (1,094 mm) | 1.5 in above median |
| Wheelbase | 54.9 in (1,395 mm) | 56.9 in (1,445 mm) | 2 in below median |
| Seat height | 30.7 in (780 mm) | 31.1 in (790 mm) | 0.4 in below median |
| Ground clearance | 6.9 in (175 mm) | 5.5 in (140 mm) | 1.4 in above median |
Honda FTR dimensions by year
| Year | Length | Width | Height | Wheelbase | Seat height | Ground clearance |
|---|---|---|---|---|---|---|
| 2002 | 81.9 in (2,080 mm) | 35.8 in (910 mm) | 43.9 in (1,115 mm) | 54.9 in (1,395 mm) | 30.7 in (780 mm) | 7.1 in (180 mm) |
| 2013 | 81.9 in (2,080 mm) | 36.2 in (919 mm) | 45.3 in (1,150 mm) | 54.9 in (1,395 mm) | 30.7 in (780 mm) | 6.9 in (175 mm) |
| 2016 | 81.9 in (2,080 mm) | 36.2 in (919 mm) | — | 54.9 in (1,395 mm) | 30.7 in (780 mm) | 6.9 in (175 mm) |
Honda FTR dimensions FAQ
Is the Honda FTR seat height low or tall?
The representative seat height is 30.7 in (780 mm), which is a lower-than-typical seat height. 0.4 in below the category median.
Does the Honda FTR have a short or long wheelbase?
The representative wheelbase is 54.9 in (1,395 mm), giving the Honda FTR a very short wheelbase for its category. 2 in below the category median. The wheelbase is about 67.1% of overall length.
How much ground clearance does the Honda FTR have?
The representative ground clearance is 6.9 in (175 mm), which is among the highest ground-clearance figures in its category. 1.4 in above the category median.
Is the Honda FTR compact or large?
The representative overall length is 81.9 in (2,080 mm), making the Honda FTR shorter than most comparable Honda models. 0.4 in below the category median. Its rough length × width storage footprint is about 20.6 sq ft (1.91 m²).
What do the Honda FTR width and height suggest?
Its representative width is 36.2 in (919 mm) and representative height is 44.6 in (1,132 mm). The width is among the widest comparable Honda models. The height is among the tallest comparable Honda models.
Did the Honda FTR dimensions change much by year?
The biggest supplied shift is in overall height: increased from 43.9 in (1,115 mm) in 2002 to 45.3 in (1,150 mm) in 2013, a change of 1.4 in. Check the year-by-year section above for the full breakdown.