For the 1995 model year, the Honda CBR 600 F3 motorcycle has a listed dry weight of 407.9 lb (185 kg).
Honda CBR 600 F3 weight overview
This is neither unusually light nor extremely heavy. For most riders the practical weight question is more about seat height, center of mass and low-speed balance than the scale number alone. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.
Middleweight Motorcycle
How heavy is the Honda CBR 600 F3?
dry weight
Using a model-level dry weight comparison, the Honda CBR 600 F3 is heavier than about 60.7% of 42 Honda sport bikes with compatible weight data.
Dry weight
Bike + rider total weight
These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.
Honda CBR 600 F3 weight & related specs
| Model years covered | 1995 |
|---|---|
| Dry weight | 407.9 lb (185 kg) |
| Engine displacement | 599 cc |
| Power | 100 hp |
| Torque | 45.6 lb-ft (61.8 Nm) |
Useful weight calculations
| Horsepower per 100 lb | 24.52 hp / 100 lb |
|---|---|
| Pounds per horsepower | 4.08 lb / hp |
| Torque per 100 lb | 11.18 lb-ft / 100 lb |
| Displacement per pound | 1.47 cc / lb |
| Weight per 100 cc | 68.1 lb / 100 cc |
What the weight numbers tell you
Honda CBR 600 F3 weight FAQ
How heavy is the Honda CBR 600 F3?
Listed dry weight is 407.9 lb (185 kg). Because no usable wet/running figure was supplied, treat that as a lower starting point rather than the exact on-road weight.
Is the Honda CBR 600 F3 heavy compared with other Honda sport bikes?
It sits fairly close to the middle of the category. Its representative dry weight is around the 61st percentile among 42 compatible Honda sport bikes.
How heavy is the Honda CBR 600 F3 with an average-size rider?
A 180 lb rider brings the simple bike-plus-rider total to roughly 587.9 lb (266.6 kg) using the representative dry figure. Gear and luggage would add more.
How much horsepower does the Honda CBR 600 F3 have per 100 lb?
Where compatible power and weight figures are available, it works out to 24.52 hp per 100 lb. That places it around the 69th percentile within the compatible Honda sport power-to-weight comparison.
Can I treat the Honda CBR 600 F3 dry weight as curb weight?
No. Dry weight excludes at least some operating fluids, so the actual ready-to-ride motorcycle will weigh more.
How much torque does the Honda CBR 600 F3 have per 100 lb?
The calculated torque-to-weight range is 11.18 lb-ft per 100 lb. It is useful for comparing bikes with very different overall weights.
What is the Honda CBR 600 F3 displacement per pound?
Engine displacement relative to bike weight is 1.47 cc per lb. It can help compare motorcycles from very different displacement classes without relying on cc alone.
What is the Honda CBR 600 F3 weight difference versus the category median?
The model sits about 24.3 lb (11 kg) heavier than the compatible median Honda sport bike weight used on this page.
Will the Honda CBR 600 F3 feel heavy at low speed?
It is most likely to feel heavy while stopped, backing up or on a slope rather than once settled at normal riding speed. Seat height and center of gravity matter a lot.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.