For the 2015 model year, the Honda BeAT FI motorcycle has a supplied wet/running weight of 209.4 lb (95 kg) and a dry weight of 198.4 lb (90 kg).
Honda BeAT FI weight overview
This is a genuinely light bike. That usually makes parking, pushing it around a garage and catching small low-speed balance errors easier than on larger motorcycles.
Very Light Motorcycle
How heavy is the Honda BeAT FI?
wet weight
Using a model-level wet weight comparison, the Honda BeAT FI is lighter than about 86.4% of 70 Honda scooters with compatible weight data.
Dry vs ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Honda BeAT FI weight & related specs
| Model years covered | 2015 |
|---|---|
| Wet / running weight | 209.4 lb (95 kg) |
| Dry weight | 198.4 lb (90 kg) |
| Engine displacement | 108 cc |
| Torque | 6.4 lb-ft (8.7 Nm) |
| Fuel capacity | 1 US gal (3.8 L) |
| Full-tank fuel weight (estimated) | 6.2 lb (2.8 kg) |
Useful weight calculations
| Torque per 100 lb | 3.06 lb-ft / 100 lb |
|---|---|
| Displacement per pound | 0.52 cc / lb |
| Weight per 100 cc | 193.9 lb / 100 cc |
| Fuel weight as % of bike weight | 3% |
| Weight with full tank | 204.7 lb (92.8 kg) |
What the weight numbers tell you
Honda BeAT FI weight FAQ
How much does the Honda BeAT FI weigh?
For the model years covered here, wet/running weight is 209.4 lb (95 kg), while dry weight is 198.4 lb (90 kg). Do not treat dry and wet figures as interchangeable.
How does the Honda BeAT FI weight compare with similar Hondas?
Relatively light. On a model-level comparison, it is lighter than about 86.4% of 70 Honda scooters with the same weight basis.
What does a full tank of gas weigh on the Honda BeAT FI?
A full tank works out to about 6.2 lb (2.8 kg) from the listed 1 US gal (3.8 L) capacity. Actual fuel density varies slightly, so treat it as a practical estimate.
What does the Honda BeAT FI weigh with a 180 lb rider?
The approximate combined total is 389.4 lb (176.6 kg) with a 180 lb rider, based on the representative wet/running weight used on this page.
What does the Honda BeAT FI weigh with a full tank?
Filling the listed tank brings the calculated bike weight to roughly 204.7 lb (92.8 kg). This estimate is most useful when no official wet/running figure is available.
How much weight do fuel and fluids add to the Honda BeAT FI?
Available years with both measurements show about 11 lb (5 kg) added between dry and ready-to-ride figures. Fuel explains part of it, while oil, coolant and specification definitions can explain the rest.
How much of the Honda BeAT FI total weight comes from fuel?
Fuel accounts for roughly 3% of the available motorcycle weight figure. On lighter bikes that share can be surprisingly noticeable.
How does Honda BeAT FI torque compare with its weight?
Available data gives 3.06 lb-ft per 100 lb. That ratio helps explain how strong the engine is relative to the bike’s mass, especially at lower speeds.
What is the Honda BeAT FI engine-size-to-weight ratio?
The model has about 0.52 cc per lb in the available data. This simply shows how much engine displacement there is for each pound of motorcycle weight.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Honda Powersports website.