The Honda Ape 50 Type D motorcycle specifications include a 49 cc (2.99 cu in) engine, power of 3.6 hp (2.6 kW) @ 8,000 rpm, a 5-speed gearbox, and a listed weight of 82 kg (180.8 lb).
Key specifications
The 2013 model is treated as the standard specification. Only later model years with a different supplied value are shown below.
How the Honda Ape 50 Type D compares
This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.
About 93% lower than the Honda database average. Around the 1st percentile across Honda models.
About 91% lower than the Honda database average. Around the 3rd percentile across Honda models.
About 58% lighter than the Honda database average. Around the 4th percentile across Honda models.
About 8% lower than the Honda database average. Around the 19th percentile across Honda models.
About 59% smaller than the Honda database average. Around the 12th percentile across Honda models.
Dimensions compared with Honda average
Each measurement is compared with the average value across Honda models where that dimension is available.
1,715
2,078
17% below average.
780
827
6% below average.
1,155
1,161
Close to average.
1,185
1,431
17% below average.
715
780
8% below average.
155
184
16% below average.
Mechanical overview
Additional useful specifications
| Front tire size | 120/80-12 |
|---|---|
| Rear tire size | 120/80-12 |
| Front tire width | 120 mm |
| Front tire aspect ratio | 80% |
| Front rim diameter | 12 in |
| Rear tire width | 120 mm |
| Rear tire aspect ratio | 80% |
| Rear rim diameter | 12 in |
| Estimated theoretical fuel range | 369 km |
| Power-to-weight ratio | 0.044 hp/kg |
| Power-to-weight | 43.9 hp/tonne |
| Specific power | 73.5 hp/L |
| Bore/stroke ratio | 1.18:1 (Oversquare) |
Model information
| Category | Allround |
|---|
Engine specifications
| Engine type | Single cylinder, four-stroke |
|---|---|
| Displacement | 49 cc (2.99 cu in) |
| Power | 3.6 hp (2.6 kW) @ 8,000 rpm |
| Torque | 3.6 Nm (0.4 kgf-m or 2.7 ft.lbs) @ 6,000 rpm |
| Bore × stroke | 42.0 x 35.6 mm (1.7 x 1.4 inches) |
| Compression ratio | 9.2:1 |
| Cooling system | Air |
| Fuel system | Injection. PGM-FI |
| Fuel control | Overhead Cams (OHC) |
| Ignition | Full transistor type battery ignition |
| Starter | Kick |
Transmission and drivetrain
| Gearbox | 5-speed |
|---|---|
| Final drive | Chain (final drive) |
| Clutch | Wet, multiplate |
Chassis and suspension
| Frame | Diamond, steel |
|---|---|
| Front suspension | Telescopic fork |
| Rear suspension | Swing arm |
| Rake | 28.3° |
| Trail | 89 mm (3.5 inches) |
Brakes, wheels and tires
| Front brakes | Single disc. Hydraulic |
|---|---|
| Rear brakes | Single disc. Hydraulic |
| Front tire | 120/80-12 |
| Rear tire | 120/80-12 |
Dimensions and weight
| Wet weight | 82 kg (180.8 lb) |
|---|---|
| Seat height | 715 mm (28.1 inches) |
| Overall length | 1,715 mm (67.5 inches) |
| Overall width | 780 mm (30.7 inches) |
| Overall height | 1,155 mm (45.5 inches) |
| Wheelbase | 1,185 mm (46.7 inches) |
| Ground clearance | 155 mm (6.1 inches) |
Fuel and emissions
| Fuel capacity | 5.50 L (1.45 US gal) |
|---|---|
| Fuel consumption | 1.49 L/100 km (67.1 km/l or 157.87 mpg) |
| Greenhouse gases | 34.6 CO 2 g/km. (CO2 – Carbon dioxide emission) |
Other specifications
| Color options | Silver, blue, black, white, grey |
|---|---|
| Seat | Single seat |
| Comments | Sold in some Asian countries. Model id: JBH-AC18. |
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.