Across 5 covered model years from 2013 to 2017, the Harley-Davidson Dyna Street Bob motorcycle has supplied wet/running weights ranging from 672 lb (304.8 kg) and dry weights ranging from 639.1 lb (289.9 kg) to 641.5 lb (291 kg), depending on model year.
Harley-Davidson Dyna Street Bob weight overview
This sits in heavyweight territory. Riders should think about garage movement, backing up, surface slope and passenger/luggage load as much as the on-road feel.
Very Heavy Motorcycle
How heavy is the Harley-Davidson Dyna Street Bob?
wet weight
Using a model-level wet weight comparison, the Harley-Davidson Dyna Street Bob is heavier than about 51.2% of 168 Harley-Davidson custom/cruiser motorcycles with compatible weight data.
Dry vs ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Harley-Davidson Dyna Street Bob weight & related specs
| Model years covered | 2013, 2014, 2015, 2016, 2017 |
|---|---|
| Wet / running weight | 672 lb (304.8 kg) |
| Dry weight | 639.1 lb (289.9 kg) to 641.5 lb (291 kg) |
| Engine displacement | 1,573.3 cc to 1,690 cc |
| Power | 76.4 hp to 77.5 hp |
| Torque | 92 lb-ft (124.8 Nm) to 95.9 lb-ft (130 Nm) |
| Fuel capacity | 4.7 US gal (17.79 L) to 4.7 US gal (17.8 L) |
| Full-tank fuel weight (estimated) | 29.2 lb (13.3 kg) |
Weight changes by model year
The 2013 model is used as the baseline where data is available. Only later supplied values that differ are shown below. A year pill does not mean every individual weight field was supplied for that year.
Useful weight calculations
| Horsepower per 100 lb | 11.37 hp / 100 lb to 11.53 hp / 100 lb |
|---|---|
| Pounds per horsepower | 8.67 lb / hp to 8.8 lb / hp |
| Torque per 100 lb | 13.7 lb-ft / 100 lb to 14.27 lb-ft / 100 lb |
| Displacement per pound | 2.34 cc / lb to 2.51 cc / lb |
| Weight per 100 cc | 39.8 lb / 100 cc to 42.7 lb / 100 cc |
| Fuel weight as % of bike weight | 4.3% |
| Weight with full tank | 668.3 lb (303.2 kg) to 670.8 lb (304.3 kg) |
What the weight numbers tell you
Harley-Davidson Dyna Street Bob weight FAQ
What does the Harley-Davidson Dyna Street Bob weigh ready to ride?
The supplied figures span 672 lb (304.8 kg) for wet/running weight and 639.1 lb (289.9 kg) to 641.5 lb (291 kg) for dry weight across the years in this page. Wet weight is the better guide to what you actually manage on the road.
Is the Harley-Davidson Dyna Street Bob heavy compared with other Harley-Davidson custom/cruiser motorcycles?
It sits fairly close to the middle of the category. Its representative wet weight is around the 51st percentile among 168 compatible Harley-Davidson custom/cruiser motorcycles.
Does the Harley-Davidson Dyna Street Bob weight change by model year?
Not every covered year uses the same figure. The page groups identical values together and lists the later model years where the supplied weight specification changes.
How much does the Harley-Davidson Dyna Street Bob fuel weigh?
The listed tank capacity is 4.7 US gal (17.79 L) to 4.7 US gal (17.8 L). Using approximately 0.745 kg/L gasoline, a full tank is roughly 29.2 lb (13.3 kg). That is an estimate for fuel mass, not an official Harley-Davidson curb-weight calculation.
How heavy is the Harley-Davidson Dyna Street Bob with an average-size rider?
A 180 lb rider brings the simple bike-plus-rider total to roughly 852 lb (386.4 kg) using the representative wet/running figure. Gear and luggage would add more.
How much horsepower does the Harley-Davidson Dyna Street Bob have per 100 lb?
Where compatible power and weight figures are available, it works out to 11.37 hp per 100 lb to 11.53 hp per 100 lb. That places it around the 73rd percentile within the compatible Harley-Davidson custom / cruiser power-to-weight comparison.
What does the Harley-Davidson Dyna Street Bob weigh with a full tank?
Based on the available dry-weight and tank-capacity data, a full-tank estimate is 668.3 lb (303.2 kg) to 670.8 lb (304.3 kg). Oil, coolant and market-specific equipment can still make actual ready-to-ride weight different.
What is the difference between Harley-Davidson Dyna Street Bob dry and wet weight?
The supplied model-year data shows roughly 30.4 lb (13.8 kg) to 32.8 lb (14.9 kg) between dry and wet/running weight. The exact gap can vary by year and by the manufacturer’s weight definition.
How much torque does the Harley-Davidson Dyna Street Bob have per 100 lb?
The calculated torque-to-weight range is 13.7 lb-ft per 100 lb to 14.27 lb-ft per 100 lb. It is useful for comparing bikes with very different overall weights.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Harley-Davidson website.