Harley-Davidson Dyna Low Rider S Weight (672lb)

Quick answer

For the 2017 model year, the Harley-Davidson Dyna Low Rider S motorcycle has a supplied wet/running weight of 672.4 lb (305 kg) and a dry weight of 646 lb (293 kg).

Wet / running weight672.4 lb (305 kg)
Dry weight646 lb (293 kg)
Fuel capacity4.7 US gal (17.8 L)
Full tank fuel weight29.2 lb (13.3 kg)
Model years covered
2017

Harley-Davidson Dyna Low Rider S weight overview

WHAT THIS MEANS

The scale number is high enough that parking and low-speed balance deserve real consideration. Once the bike leans too far, recovering it takes much more effort than on a light machine.

Very Heavy Motorcycle

CATEGORY WEIGHT POSITION

How heavy is the Harley-Davidson Dyna Low Rider S?

wet weight

Using a model-level wet weight comparison, the Harley-Davidson Dyna Low Rider S is lighter than about 50.9% of 108 Harley-Davidson motorcycles with compatible weight data.

LighterTypicalHeavier
672.4 lb (305 kg)
108 Harley-Davidson motorcyclesMedian: 672.4 lb (305 kg)
WEIGHT VISUAL

Dry vs ready-to-ride weight

Wet / running weight672.4 lb (305 kg)
Dry weight646 lb (293 kg)
REAL-WORLD LOAD

Bike + rider total weight

These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.

150 lb rider822.4 lb (373 kg)bike + rider • bike is 81.8% of total mass
180 lb rider852.4 lb (386.6 kg)bike + rider • bike is 78.9% of total mass
210 lb rider882.4 lb (400.3 kg)bike + rider • bike is 76.2% of total mass

Harley-Davidson Dyna Low Rider S weight & related specs

Model years covered 2017
Wet / running weight 672.4 lb (305 kg)
Dry weight 646 lb (293 kg)
Engine displacement 1,801 cc
Torque 115.1 lb-ft (156 Nm)
Fuel capacity 4.7 US gal (17.8 L)
Full-tank fuel weight (estimated) 29.2 lb (13.3 kg)

Useful weight calculations

Torque per 100 lb 17.11 lb-ft / 100 lb
Displacement per pound 2.68 cc / lb
Weight per 100 cc 37.3 lb / 100 cc
Fuel weight as % of bike weight 4.3%
Weight with full tank 675.2 lb (306.3 kg)

What the weight numbers tell you

Using a model-level wet weight comparison, the Harley-Davidson Dyna Low Rider S is lighter than about 50.9% of 108 Harley-Davidson motorcycles with compatible weight data.
The listed fuel tank capacity is 4.7 US gal (17.8 L). A full tank of gasoline is estimated to weigh about 29.2 lb (13.3 kg), which helps explain part of the difference between dry and ready-to-ride mass.

Harley-Davidson Dyna Low Rider S weight FAQ

What is the Harley-Davidson Dyna Low Rider S dry and wet weight?

Across the covered 2017 years, listed wet/running weight is 672.4 lb (305 kg) and listed dry weight is 646 lb (293 kg). Check the year-change section because the exact figure can vary by model year.

Is the Harley-Davidson Dyna Low Rider S lighter or heavier than other Harley-Davidson motorcycles?

Weight is broadly typical for the category, landing around the 49th percentile in this model-level Harley-Davidson comparison.

How much does a full tank add to the Harley-Davidson Dyna Low Rider S?

Based on the supplied 4.7 US gal (17.8 L) tank capacity, the gasoline itself weighs about 29.2 lb (13.3 kg) when full. This helps explain part of the difference between dry and ready-to-ride mass.

What is the combined Harley-Davidson Dyna Low Rider S and rider weight?

Using the model’s representative wet/running weight and a 180 lb rider, the combined bike-and-rider mass is about 852.4 lb (386.6 kg) before riding gear, luggage or a passenger.

What is the estimated Harley-Davidson Dyna Low Rider S weight with a full tank of gas?

Filling the listed tank brings the calculated bike weight to roughly 675.2 lb (306.3 kg). This estimate is most useful when no official wet/running figure is available.

How much weight do fuel and fluids add to the Harley-Davidson Dyna Low Rider S?

Where both figures are available, the listed wet-versus-dry difference is about 26.5 lb (12 kg). That gap reflects fuel and operating fluids, plus any differences in how the source defines dry and running weight.

How much of the Harley-Davidson Dyna Low Rider S total weight comes from fuel?

The calculated full-tank fuel mass is about 4.3% of the bike’s listed weight. This helps show why a dry-weight number can understate what you actually manage on the road.

How does Harley-Davidson Dyna Low Rider S torque compare with its weight?

Where compatible torque and weight figures are available, the model works out to 17.11 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.

What is the Harley-Davidson Dyna Low Rider S engine-size-to-weight ratio?

The available figures work out to 2.68 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.

Official information note

Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Harley-Davidson website.