Ducati ST3s ABS Weight (448lb)

Quick answer

For the 2006 model year, the Ducati ST3s ABS motorcycle has a listed dry weight of 447.5 lb (203 kg).

Dry weight447.5 lb (203 kg)
Model years covered
2006

Ducati ST3s ABS weight overview

WHAT THIS MEANS

The bike falls into a normal middleweight range. At road speed the mass is usually less obvious; parking, slopes and walking-speed maneuvers are where you notice it most. The comparison uses dry weight because a usable wet/running figure was not supplied, so the actual ready-to-ride motorcycle will be heavier.

Middleweight Motorcycle

WEIGHT VISUAL

Dry weight

Dry weight447.5 lb (203 kg)
REAL-WORLD LOAD

Bike + rider total weight

These totals use the model’s representative dry weight. They exclude riding gear, luggage and a passenger.

150 lb rider597.5 lb (271 kg)bike + rider • bike is 74.9% of total mass
180 lb rider627.5 lb (284.6 kg)bike + rider • bike is 71.3% of total mass
210 lb rider657.5 lb (298.3 kg)bike + rider • bike is 68.1% of total mass

Ducati ST3s ABS weight & related specs

Model years covered 2006
Dry weight 447.5 lb (203 kg)
Engine displacement 992 cc
Torque 68.6 lb-ft (93 Nm)

Useful weight calculations

Torque per 100 lb 15.33 lb-ft / 100 lb
Displacement per pound 2.22 cc / lb
Weight per 100 cc 45.1 lb / 100 cc

Ducati ST3s ABS weight FAQ

What is the Ducati ST3s ABS dry weight?

The available dry weight is 447.5 lb (203 kg). Actual ready-to-ride weight will be higher after fuel and operating fluids are added.

What is the combined Ducati ST3s ABS and rider weight?

Using the model’s representative dry weight and a 180 lb rider, the combined bike-and-rider mass is about 627.5 lb (284.6 kg) before riding gear, luggage or a passenger.

Is the listed Ducati ST3s ABS weight ready to ride?

No. Dry weight excludes at least some operating fluids, so the actual ready-to-ride motorcycle will weigh more.

How does Ducati ST3s ABS torque compare with its weight?

Where compatible torque and weight figures are available, the model works out to 15.33 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.

What is the Ducati ST3s ABS engine-size-to-weight ratio?

The available figures work out to 2.22 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.

Where will I notice the Ducati ST3s ABS weight most?

Expect the weight to matter more off the throttle than at speed: garage movement, uneven footing and parking angle are the practical situations to think about.

Official information note

Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Ducati website.