Across the 2016 and 2017 model years, the Ducati Multistrada 1200 Pikes Peak motorcycle has supplied wet/running weights ranging from 509.3 lb (231 kg) to 518.1 lb (235 kg) and dry weights ranging from 458.6 lb (208 kg) to 467.4 lb (212 kg), depending on model year.
Ducati Multistrada 1200 Pikes Peak weight overview
At this weight, footing and parking technique matter. Once moving, geometry and balance can disguise the mass, but you still have to manage the full weight at walking speed.
Heavy Motorcycle
How heavy is the Ducati Multistrada 1200 Pikes Peak?
wet weight
Using a model-level wet weight comparison, the Ducati Multistrada 1200 Pikes Peak is lighter than about 56.7% of 15 Ducati allround models with compatible weight data.
Dry vs ready-to-ride weight
Bike + rider total weight
These totals use the model’s representative wet weight. They exclude riding gear, luggage and a passenger.
Ducati Multistrada 1200 Pikes Peak weight & related specs
| Model years covered | 2016, 2017 |
|---|---|
| Wet / running weight | 509.3 lb (231 kg) to 518.1 lb (235 kg) |
| Dry weight | 458.6 lb (208 kg) to 467.4 lb (212 kg) |
| Engine displacement | 1,198.4 cc |
| Power | 160 hp |
| Torque | 100.3 lb-ft (136 Nm) |
| Fuel capacity | 5.28 US gal (20 L) |
| Full-tank fuel weight (estimated) | 32.8 lb (14.9 kg) |
Weight changes by model year
The 2016 model is used as the baseline where data is available. Only later supplied values that differ are shown below. A year pill does not mean every individual weight field was supplied for that year.
Useful weight calculations
| Horsepower per 100 lb | 30.88 hp / 100 lb to 31.42 hp / 100 lb |
|---|---|
| Pounds per horsepower | 3.18 lb / hp to 3.24 lb / hp |
| Torque per 100 lb | 19.36 lb-ft / 100 lb to 19.7 lb-ft / 100 lb |
| Displacement per pound | 2.31 cc / lb to 2.35 cc / lb |
| Weight per 100 cc | 42.5 lb / 100 cc to 43.2 lb / 100 cc |
| Fuel weight as % of bike weight | 6.3% to 6.5% |
| Weight with full tank | 491.4 lb (222.9 kg) to 500.2 lb (226.9 kg) |
What the weight numbers tell you
Ducati Multistrada 1200 Pikes Peak weight FAQ
What is the Ducati Multistrada 1200 Pikes Peak dry and wet weight?
Across the covered 2016-2017 years, listed wet/running weight is 509.3 lb (231 kg) to 518.1 lb (235 kg) and listed dry weight is 458.6 lb (208 kg) to 467.4 lb (212 kg). Check the year-change section because the exact figure can vary by model year.
Is the Ducati Multistrada 1200 Pikes Peak lighter or heavier than other Ducati allround models?
Weight is broadly typical for the category, landing around the 43rd percentile in this model-level Ducati comparison.
Which Ducati Multistrada 1200 Pikes Peak years have different weight specs?
The supplied data shows different weight figures across the 2016-2017 model years. Use the year-specific changes section above for the exact value attached to each changed year.
How much does a full tank add to the Ducati Multistrada 1200 Pikes Peak?
Based on the supplied 5.28 US gal (20 L) tank capacity, the gasoline itself weighs about 32.8 lb (14.9 kg) when full. This helps explain part of the difference between dry and ready-to-ride mass.
What is the combined Ducati Multistrada 1200 Pikes Peak and rider weight?
Using the model’s representative wet/running weight and a 180 lb rider, the combined bike-and-rider mass is about 693.7 lb (314.6 kg) before riding gear, luggage or a passenger.
What is the Ducati Multistrada 1200 Pikes Peak power-to-weight ratio?
Available model-year data produces 30.88 hp per 100 lb to 31.42 hp per 100 lb. It shows engine output relative to motorcycle mass rather than just quoting peak horsepower. That places it around the 81st percentile within the compatible Ducati allround power-to-weight comparison.
What does the Ducati Multistrada 1200 Pikes Peak weigh with a full tank?
Based on the available dry-weight and tank-capacity data, a full-tank estimate is 491.4 lb (222.9 kg) to 500.2 lb (226.9 kg). Oil, coolant and market-specific equipment can still make actual ready-to-ride weight different.
How much torque does the Ducati Multistrada 1200 Pikes Peak have per 100 lb?
Where compatible torque and weight figures are available, the model works out to 19.36 lb-ft per 100 lb to 19.7 lb-ft per 100 lb. This gives more context than torque alone because it relates engine twist to the mass it has to move.
What is the Ducati Multistrada 1200 Pikes Peak displacement per pound?
The available figures work out to 2.31 cc per lb to 2.35 cc per lb. This is not a performance rating, but it is a useful way to compare engine size against total motorcycle mass.
Motorcycle specifications can vary by model year, market, equipment and the exact dry/curb-weight definition. Calculated fuel-weight and ratio figures on this page are estimates derived from the supplied specifications. Confirm critical figures in the owner’s manual or on the official Ducati website.