BMW R 1200 C Montauk Specs (Top Speed | Horsepower | Weight)

The BMW R 1200 C Montauk motorcycle specifications include a 1,170 cc (71.39 cu in) engine, power of 61 hp (44.5 kW) @ 5,000 rpm, a 5-speed gearbox, and a listed weight of 245 kg (540.1 lb).

Key specifications

2004-2005Model years
1,170 ccDisplacement
61 hpPower
98.0 Nm @ 3,000 rpmTorque
245 kgDry weight
790 mmSeat height
17.5 LFuel tank
1,641 mmWheelbase
Model years covered
20042005
Year-specific specification changes

The 2004 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Front suspension
2005BMW Motorrad Telelever
Fuel system
2005Injection. Electronic intake pipe injection/digital engine management: Bosch Motronic MA 2.4 with overrun fuel cut-off, twin spark ignition
Power
200560.3 hp (44.0 kW) @ 5,000 rpm
Rear suspension
2005Die-cast steel single-sided swinging arm with BMW Motorrad Monolever
Front wheel travel
200535 mm (1.4 inches)
Power/weight ratio
20050.2463 hp/kg
Rear wheel travel
2005135 mm (5.3 inches)

How the BMW R 1200 C Montauk compares

This compares the motorcycle with all BMW models in this specifications database. The blue marker is this model and the grey line is the BMW database average.

Engine power61 hp
Low 12 hpAverage 81.6 hpHigh 193 hp

About 25% lower than the BMW database average. Around the 43rd percentile across BMW models.

Displacement1,170 cc
Low 247 ccAverage 909 ccHigh 1,649 cc

About 29% higher than the BMW database average. Around the 87th percentile across BMW models.

Seat height790 mm
Low 710 mmAverage 809 mmHigh 910 mm

Very close to the BMW database average. Around the 32nd percentile across BMW models.

Fuel capacity17.5 L
Low 9.8 LAverage 19.2 LHigh 30 L

About 9% smaller than the BMW database average. Around the 45th percentile across BMW models.

This model BMW database average

BMW database percentile rankings

Percentiles show where this motorcycle sits across the BMW specifications database. They are descriptive database rankings, not performance ratings.

Engine power43rd

61 hp — more powerful than about 43% of BMW models with power data.

Displacement87th

1,170 cc — larger displacement than about 87% of BMW models.

Seat height32nd

790 mm — taller than about 32% of BMW models.

Fuel capacity45th

17.5 L — larger than about 45% of BMW fuel tanks in this database.

Dimensions compared with BMW average

Each measurement is compared with the average value across BMW models where that dimension is available.

Overall length2,370 mm
This bike

2,370

BMW avg

2,193

8% above average.

Overall width1,120 mm
This bike

1,120

BMW avg

877

28% above average.

Overall height1,340 mm
This bike

1,340

BMW avg

1,199

12% above average.

Wheelbase1,641 mm
This bike

1,641

BMW avg

1,497

10% above average.

Seat height790 mm
This bike

790

BMW avg

809

Close to average.

Mechanical overview

Engine layout snapshot

Two cylinder boxer, four-stroke • 1,170 cc • Oil & air cooled • 61 hp
Chassis snapshot

Wheelbase 1,641 mmSeat 790 mm
5-speed • Shaft drive (cardan) (final drive) • 150/80-VR16 front / 170/80-VR15 rear

Additional useful specifications

Front tire size 150/80-VR16
Rear tire size 170/80-VR15
Power-to-weight ratio 0.249 hp/kg
Power-to-weight 249.0 hp/tonne
Specific power 52.1 hp/L
Bore/stroke ratio 1.38:1 (Oversquare)

Model information

Category Custom / cruiser

Engine specifications

Engine type Two cylinder boxer, four-stroke
Displacement 1,170 cc (71.39 cu in)
Power 61 hp (44.5 kW) @ 5,000 rpm
Torque 98.0 Nm (10.0 kgf-m or 72.3 ft.lbs) @ 3,000 rpm
Bore × stroke 101.0 x 73 mm (4.0 x 2.9 inches)
Compression ratio 10.0:1
Valves per cylinder 4
Cooling system Oil & air
Fuel system Injection
Fuel control Single Overhead Cams (SOHC)

Transmission and drivetrain

Gearbox 5-speed
Final drive Shaft drive (cardan) (final drive)

Chassis and suspension

Frame Three-section composite frame consisting of front and rear section, load bearing engine.
Front suspension BMW Motorrad Telelever; stanchion diameter 35 mm, central strut
Rear suspension Die-cast steel single-sided swinging arm with BMW Motorrad Monolever; WAD strut (travel-related damping), spring pre-load adjustable to continuously variable levels by means of hydraulic handwheel
Front wheel travel 144 mm (5.7 inches)
Rear wheel travel 100 mm (3.9 inches)

Brakes, wheels and tires

Front brakes Double disc
Rear brakes Single disc
Front tire 150/80-VR16
Rear tire 170/80-VR15

Dimensions and weight

Dry weight 245 kg (540.1 lb)
Seat height 790 mm (31.1 inches)
Overall length 2,370 mm (93.3 inches)
Overall width 1,120 mm (44.1 inches)
Overall height 1,340 mm (52.8 inches)
Wheelbase 1,641 mm (64.6 inches)

Fuel and emissions

Fuel capacity 17.50 L (4.62 US gal)
Reserve fuel capacity 4.00 L (1.06 US gal)

Performance

Top speed 168.0 km/h (104.4 mph)
Power/weight ratio 0.2490 hp/kg

Other specifications

Comments Special equipment BMW Motorrad Integral ABS (fully integral)

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from BMW models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official BMW information before relying on them. Visit the official BMW website.