The Triumph Daytona 675 motorcycle specifications include a 675 cc (41.19 cu in) engine and a 6-speed gearbox.
Key specifications
2006-2016Model years
675 ccDisplacement
72.0 Nm @ 11,750 rpmTorque
825 mmSeat height
17.4 LFuel tank
1,392 mmWheelbase
Model years covered
20062007200820092010201120122013201420152016
Year-specific specification changes
The 2006 model is treated as the standard specification. Only later model years with a different supplied value are shown below.
Bore × stroke
2013201676.0 x 49.6 mm (3.0 x 2.0 inches)
Frame
2009Aluminium beam twin spar
2010Aluminium beam twin spar. Swingarm: braced, twin-sided, aluminium alloy with adjustable pivot position.
20122016Aluminium beam twin spar. Braced, twin-sided, aluminium alloy with adjustable pivot position swing arm.
Front brakes
2010Double disc. Nissin 4-piston radial mono-block calipers
2013Double disc. Nissin 4-piston radial mono-block calipers. Switchable ABS model available.
20142016Double disc. Nissin 4-piston radial mono-block calipers. Switchable ABS.
Front suspension
200941mm upside down forks with adjustable preload. rebound and high/low speed compression damping. 120mm travel
2010Kayaba 41mm upside down forks with adjustable preload, rebound and high/low speed compression damping
20112012Kayaba 41mm upside down forks with adjustable preload. rebound and high/low speed compression damping. 110mm wheel travel
20132014KYB 41mm upside down forks with adjustable preload, rebound and high/low speed compression damping, 110mm travel
20152016Kayaba 41mm upside down forks with adjustable preload, rebound and high/low speed compression damping.
Fuel system
20112016Injection. Multipoint sequential electronic fuel injection with forced air induction and SAI
Rear brakes
2010Single disc. Nissin single piston caliper
2013Single disc. Nissin single piston caliper. Switchable ABS model available.
20142016Single disc. Nissin single piston caliper. Switchable ABS.
Rear suspension
2009Monoshock with piggy back reservoir adjustable for preload. rebound and high/low speed comporession damping. 130mm rear wheel travel
2010Kayaba monoshock with piggy back reservoir adjustable for preload, rebound and high/low speed comporession damping
20112012Kayaba monoshock with piggy back reservoir adjustable for preload. rebound and high/low speed compression damping. 130mm rear wheel travel
20132014KYB monoshock with piggy back reservoir adjustable for preload, rebound and high/low speed compression damping, 130mm rear wheel travel
20152016Kayaba monoshock with piggy back reservoir adjustable for preload, rebound and high/low speed compression damping.
Torque
2009201075.0 Nm (7.6 kgf-m or 55.3 ft.lbs) @ 11,750 rpm
201171.9 Nm (7.3 kgf-m or 53.0 ft.lbs) @ 11,700 rpm
201272.0 Nm (7.3 kgf-m or 53.1 ft.lbs) @ 11,700 rpm
2013201674.0 Nm (7.5 kgf-m or 54.6 ft.lbs) @ 11,900 rpm
Wheelbase
200920101,395 mm (54.9 inches)
20111,394 mm (54.9 inches)
201220151,395 mm (54.9 inches)
20161,375 mm (54.1 inches)
Clutch
2016Slip-Assist Clutch
Fuel capacity
2007200817.41 L (4.60 US gal)
201117.41 L (4.60 US gal)
Ignition
20112016Digital-inductive type via engine management system
Overall height
200920101,120 mm (44.1 inches)
201120161,105 mm (43.5 inches)
Overall length
20112,019 mm (79.5 inches)
201220162,020 mm (79.5 inches)
Overall width
20072008710 mm (28.0 inches)
20092010700 mm (27.6 inches)
2011709 mm (27.9 inches)
20122015710 mm (28.0 inches)
2016695 mm (27.4 inches)
Rake
2009201223.9°
2013201622.9°
Seat height
2011831 mm (32.7 inches)
20122015830 mm (32.7 inches)
2016820 mm (32.3 inches)
Model information
| Category | Sport |
|---|
Engine specifications
| Engine type | In-line three, four-stroke |
|---|---|
| Displacement | 675 cc (41.19 cu in) |
| Torque | 72.0 Nm (7.3 kgf-m or 53.1 ft.lbs) @ 11,750 rpm |
| Bore × stroke | 74.0 x 52.3 mm (2.9 x 2.1 inches) |
| Compression ratio | 12.7:1 |
| Cooling system | Liquid |
| Fuel system | Injection. Multipoint sequential electronic fuel injection with forced air induction |
| Fuel control | Double Overhead Cams/Twin Cam (DOHC) |
| Ignition | Digital – inductive type – via electronic engine management system |
| Starter | Electric |
Transmission and drivetrain
| Gearbox | 6-speed |
|---|---|
| Final drive | Chain (final drive) |
| Clutch | Wet. multi-plate |
Chassis and suspension
| Frame | Aluminum beam twin spar |
|---|---|
| Front suspension | 41mm USD forks with adjustable preload. rebound and compression damping |
| Rear suspension | Monoshock with piggy back reservoir adjustable for preload. rebound and compression damping |
| Rake | 23.5° |
Brakes, wheels and tires
| Front brakes | Double disc |
|---|---|
| Rear brakes | Single disc |
| Front tire | 120/70-ZR17 |
| Rear tire | 180/55-ZR17 |
Dimensions and weight
| Seat height | 825 mm (32.5 inches) |
|---|---|
| Overall length | 2,010 mm (79.1 inches) |
| Overall width | 673 mm (26.5 inches) |
| Overall height | 1,109 mm (43.7 inches) |
| Wheelbase | 1,392 mm (54.8 inches) |
Fuel and emissions
| Fuel capacity | 17.40 L (4.60 US gal) |
|---|
Other specifications
| Color options | Scorched Yellow. Tornado Red. Graphite |
|---|
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Triumph models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Triumph information before relying on them. Visit the official Triumph website.