BMW R75 5 Specs (Top Speed | Horsepower | Weight)

The BMW R75 5 motorcycle specifications include a 745 cc (45.46 cu in) engine.

Key specifications

1969Year released
745 ccDisplacement
60.0 Nm @ 6,200 rpmTorque
850 mmSeat height
24 LFuel tank
165 mmGround clearance

How the BMW R75 5 compares

This compares the motorcycle with all BMW models in this specifications database. The blue marker is this model and the grey line is the BMW database average.

Displacement745 cc
Low 247 ccAverage 909 ccHigh 1,649 cc

About 18% lower than the BMW database average. Around the 34th percentile across BMW models.

Seat height850 mm
Low 710 mmAverage 809 mmHigh 910 mm

About 5% taller than the BMW database average. Around the 87th percentile across BMW models.

Fuel capacity24 L
Low 9.8 LAverage 19.2 LHigh 30 L

About 25% larger than the BMW database average. Around the 88th percentile across BMW models.

This model BMW database average

BMW database percentile rankings

Percentiles show where this motorcycle sits across the BMW specifications database. They are descriptive database rankings, not performance ratings.

Displacement34th

745 cc — larger displacement than about 34% of BMW models.

Seat height87th

850 mm — taller than about 87% of BMW models.

Fuel capacity88th

24 L — larger than about 88% of BMW fuel tanks in this database.

Dimensions compared with BMW average

Each measurement is compared with the average value across BMW models where that dimension is available.

Overall length2,150 mm
This bike

2,150

BMW avg

2,193

Close to average.

Overall width852 mm
This bike

852

BMW avg

877

Close to average.

Overall height1,040 mm
This bike

1,040

BMW avg

1,199

13% below average.

Seat height850 mm
This bike

850

BMW avg

809

5% above average.

Ground clearance165 mm
This bike

165

BMW avg

125

32% above average.

Mechanical overview

Engine layout snapshot

Two cylinder boxer, four-stroke • 745 cc • Air cooled
Chassis snapshot

Seat 850 mmClearance 165 mm
Shaft drive (cardan) (final drive) • 3.27-19 front / 4.02-18 rear

Additional useful specifications

Front tire size 3.27-19
Rear tire size 4.02-18
Bore/stroke ratio 1.24:1 (Oversquare)

Model information

Year released 1969
Category Sport

Engine specifications

Engine type Two cylinder boxer, four-stroke
Displacement 745 cc (45.46 cu in)
Torque 60.0 Nm (6.1 kgf-m or 44.3 ft.lbs) @ 6,200 rpm
Bore × stroke 82.0 x 66 mm (3.2 x 2.6 inches)
Compression ratio 9.1:1
Cooling system Air
Fuel system Carburettor
Fuel control Overhead Valves (OHV)
Starter Kick
Lubrication Wet sump

Transmission and drivetrain

Final drive Shaft drive (cardan) (final drive)
Clutch Dry-single plate-cable operated

Chassis and suspension

Front suspension Cartride
Rear suspension Twin shock-swingarm

Brakes, wheels and tires

Front brakes Expanding brake (drum brake). Twin
Rear brakes Expanding brake (drum brake)
Front tire 3.27-19
Rear tire 4.02-18

Dimensions and weight

Seat height 850 mm (33.5 inches)
Overall length 2,150 mm (84.6 inches)
Overall width 852 mm (33.5 inches)
Overall height 1,040 mm (40.9 inches)
Ground clearance 165 mm (6.5 inches)

Fuel and emissions

Fuel capacity 24.00 L (6.34 US gal)

Performance

Top speed 175.0 km/h (108.7 mph)

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from BMW models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official BMW information before relying on them. Visit the official BMW website.