BMW R nineT Pure Specs (Top Speed | Horsepower | Weight)

The BMW R nineT Pure motorcycle specifications include a 1,170 cc (71.39 cu in) engine, power of 110 hp (80.3 kW) @ 7,750 rpm, a 6-speed gearbox, and a listed weight of 219 kg (482.8 lb).

Key specifications

2017, 2023Model years
1,170 ccDisplacement
110 hpPower
116.0 Nm @ 6,000 rpmTorque
219 kgWet weight
805 mmSeat height
17 LFuel tank
1,493 mmWheelbase
Model years covered
20172023
Year-specific specification changes

The 2017 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Front tire
2023120/70-ZR17
Fuel system
2023Injection. Electronic port fuel injection
Rear tire
2023180/55-ZR17
Emission details
2023Closed-loop 3-way catalytic converter, emission standard Euro 5
Front wheel travel
2023120 mm (4.7 inches)
Overall width
2023884 mm (34.8 inches)

How the BMW R nineT Pure compares

This compares the motorcycle with all BMW models in this specifications database. The blue marker is this model and the grey line is the BMW database average.

Engine power110 hp
Low 12 hpAverage 81.6 hpHigh 193 hp

About 35% higher than the BMW database average. Around the 77th percentile across BMW models.

Displacement1,170 cc
Low 247 ccAverage 909 ccHigh 1,649 cc

About 29% higher than the BMW database average. Around the 87th percentile across BMW models.

Wet weight219 kg
Low 130 kgAverage 226.7 kgHigh 364 kg

Very close to the BMW database average. Around the 45th percentile across BMW models.

Seat height805 mm
Low 710 mmAverage 809 mmHigh 910 mm

Very close to the BMW database average. Around the 47th percentile across BMW models.

Fuel capacity17 L
Low 9.8 LAverage 19.2 LHigh 30 L

About 12% smaller than the BMW database average. Around the 40th percentile across BMW models.

This model BMW database average

BMW database percentile rankings

Percentiles show where this motorcycle sits across the BMW specifications database. They are descriptive database rankings, not performance ratings.

Engine power77th

110 hp — more powerful than about 77% of BMW models with power data.

Displacement87th

1,170 cc — larger displacement than about 87% of BMW models.

Wet weight45th

219 kg — heavier than about 45% of BMW models, or lighter than about 55%.

Seat height47th

805 mm — taller than about 47% of BMW models.

Fuel capacity40th

17 L — larger than about 40% of BMW fuel tanks in this database.

Dimensions compared with BMW average

Each measurement is compared with the average value across BMW models where that dimension is available.

Overall length2,105 mm
This bike

2,105

BMW avg

2,193

4% below average.

Overall width900 mm
This bike

900

BMW avg

877

Close to average.

Wheelbase1,493 mm
This bike

1,493

BMW avg

1,497

Close to average.

Seat height805 mm
This bike

805

BMW avg

809

Close to average.

Mechanical overview

Engine layout snapshot

Two cylinder boxer, four-stroke • 1,170 cc • Oil & air cooled • 110 hp
Chassis snapshot

Wheelbase 1,493 mmSeat 805 mm
6-speed • Shaft drive (cardan) (final drive) • 120/70-17 front / 180/55-17 rear

Additional useful specifications

Front tire size 120/70-17
Rear tire size 180/55-17
Front tire width 120 mm
Front tire aspect ratio 70%
Front rim diameter 17 in
Rear tire width 180 mm
Rear tire aspect ratio 55%
Rear rim diameter 17 in
Power-to-weight ratio 0.502 hp/kg
Power-to-weight 502.3 hp/tonne
Specific power 94.0 hp/L
Bore/stroke ratio 1.38:1 (Oversquare)

Model information

Category Naked bike

Engine specifications

Engine type Two cylinder boxer, four-stroke
Displacement 1,170 cc (71.39 cu in)
Power 110 hp (80.3 kW) @ 7,750 rpm
Torque 116.0 Nm (11.8 kgf-m or 85.6 ft.lbs) @ 6,000 rpm
Bore × stroke 101.0 x 73 mm (4.0 x 2.9 inches)
Compression ratio 12.0:1
Valves per cylinder 4
Cooling system Oil & air
Fuel system Injection. Electronic intake pipe injection
Fuel control Double Overhead Cams/Twin Cam (DOHC)
Starter Electric

Transmission and drivetrain

Gearbox 6-speed
Final drive Shaft drive (cardan) (final drive)
Clutch Single dry plate clutch, hydraulically operated

Chassis and suspension

Frame Three-section frame consisting of one front and two rear sections, load-bearing engine- gearbox unit, removeable pillion frame for single ride use
Front suspension Telescopic forks with 43 mm fixed-tube diameter
Rear suspension Cast aluminium single swinging arm with BMW Motorrad Paralever
Front wheel travel 125 mm (4.9 inches)
Rear wheel travel 120 mm (4.7 inches)
Rake 26.6°
Trail 105 mm (4.1 inches)

Brakes, wheels and tires

Front brakes Double disc. ABS. Four-piston calipers.
Rear brakes Single disc. ABS. Floating disc. Two-piston calipers.
Front tire 120/70-17
Rear tire 180/55-17

Dimensions and weight

Wet weight 219 kg (482.8 lb)
Seat height 805 mm (31.7 inches)
Overall length 2,105 mm (82.9 inches)
Overall width 900 mm (35.4 inches)
Wheelbase 1,493 mm (58.8 inches)

Fuel and emissions

Fuel capacity 17.00 L (4.49 US gal)
Emission details Closed-loop 3-way catalytic converter, emission standard EU-4

Other specifications

Color options Grey

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from BMW models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official BMW information before relying on them. Visit the official BMW website.