BMW HP2 Megamoto Specs (Top Speed | Horsepower | Weight)

The BMW HP2 Megamoto motorcycle specifications include a 1,130 cc (68.95 cu in) engine, a 6-speed gearbox, and a listed weight of 178 kg (392.4 lb).

Key specifications

2007-2011Model years

1,130 ccDisplacement

115.0 Nm @ 5,500 rpmTorque

178 kgDry weight

890 mmSeat height

13 LFuel tank

1,610 mmWheelbase

Model years covered

20072008200920102011

Year-specific specification changes

The 2007 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Displacement

200820111,170 cc (71.39 cu in)

Dry weight

2011179 kg (394.6 lb)

Engine type

20082010Two cylinder boxer, two-stroke

Frame

2011Tubular steel space frame, front and rear made of self-supporting carbon

Front brakes

20082010Double disc

2011Double disc. Optional anti-lock braking

Front suspension

20082009WAD upside-down front fork, Ø 45 mm, compression damping continuously adjustable in two ranges, rebound damping adjustable

2011Upside-down fork

Fuel system

20082010Injection. Electronic intake pipe injection/BMS-K digital engine management with overrun fuel cut-off, twin-spark ignition

2011Injection. Electronic intake pipe injection / BMS-K digital engine management with overrun fuel cut-off, single-spark ignition

Rear suspension

20082009Forged aluminium single-sided swinging arm with BMW Motorrad Paralever

2010Cast aluminium single-sided swing arm with BMW Motorrad Paralever

2011EVO Paralever, Ã–hlins central spring strut, spring pre-load continuously adjustable, rebound and compression damping adjustable, vehicle height adjustable

Torque

2010140.0 Nm (14.3 kgf-m or 103.3 ft.lbs) @ 8,250 rpm

2011115.0 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 6,000 rpm

Wheelbase

200820091,625 mm (64.0 inches)

20101,616 mm (63.6 inches)

20111,650 mm (65.0 inches)

Clutch

20082011Single dry plate clutch, hydraulically operated

Fuel capacity

201116.00 L (4.23 US gal)

Fuel consumption

200820094.10 L/100 km (24.4 km/l or 57.37 mpg)

20114.10 L/100 km (24.4 km/l or 57.37 mpg)

Greenhouse gases

2008200995.1 CO 2 g/km. (CO2 – Carbon dioxide emission)

201195.1 CO 2 g/km. (CO2 – Carbon dioxide emission)

Power/weight ratio

20110.6218 hp/kg

Seat height

2011860 mm (33.9 inches)

Valves per cylinder

200820114

How the BMW HP2 Megamoto compares

This compares the motorcycle with all BMW models in this specifications database. The blue marker is this model and the grey line is the BMW database average.

Displacement1,130 cc

Low 247 ccAverage 909 ccHigh 1,649 cc

About 24% higher than the BMW database average. Around the 71st percentile across BMW models.

Seat height890 mm

Low 710 mmAverage 809 mmHigh 910 mm

About 10% taller than the BMW database average. Around the 97th percentile across BMW models.

Fuel capacity13 L

Low 9.8 LAverage 19.2 LHigh 30 L

About 32% smaller than the BMW database average. Around the 9th percentile across BMW models.

This model BMW database average

Dimensions compared with BMW average

Each measurement is compared with the average value across BMW models where that dimension is available.

Wheelbase1,610 mm

This bike

1,610

BMW avg

1,497

8% above average.

Seat height890 mm

This bike

890

BMW avg

809

10% above average.

Mechanical overview

Engine layout snapshot

Two cylinder boxer, four-stroke • 1,130 cc • Oil & air cooled

Chassis snapshot

Wheelbase 1,610 mmSeat 890 mm

6-speed • Shaft drive (cardan) (final drive) • 120/70-ZR17 front / 180/55-ZR17 rear

Additional useful specifications

Front tire size	120/70-ZR17
Rear tire size	180/55-ZR17
Estimated theoretical fuel range	236 km
Bore/stroke ratio	1.38:1 (Oversquare)

Model information

Category	Super motard

Engine specifications

Engine type	Two cylinder boxer, four-stroke
Displacement	1,130 cc (68.95 cu in)
Torque	115.0 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 5,500 rpm
Bore × stroke	101.0 x 73 mm (4.0 x 2.9 inches)
Valves per cylinder	2
Cooling system	Oil & air
Fuel system	Injection

Transmission and drivetrain

Gearbox	6-speed
Final drive	Shaft drive (cardan) (final drive)
Clutch	Hydraulic, dry, single-disk

Chassis and suspension

Frame	Tubular steel space frame
Front suspension	Upside-down front fork, compression damping and rebound damping adjustable
Rear suspension	Cast aluminium single-sided swing arm with BMW Motorrad Paralever; Öhlins-central spring strut, spring pre-load adjustable to continuously variable levels, rebound damping and compression damping adjustable

Brakes, wheels and tires

Front brakes	Single disc
Rear brakes	Single disc
Front tire	120/70-ZR17
Rear tire	180/55-ZR17

Dimensions and weight

Dry weight	178 kg (392.4 lb)
Seat height	890 mm (35.0 inches)
Wheelbase	1,610 mm (63.4 inches)

Fuel and emissions

Fuel capacity	13.00 L (3.43 US gal)
Fuel consumption	5.50 L/100 km (18.2 km/l or 42.77 mpg)
Greenhouse gases	127.6 CO 2 g/km. (CO2 – Carbon dioxide emission)

Performance

Power/weight ratio	0.5899 hp/kg

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from BMW models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official BMW information before relying on them. Visit the official BMW website.