BMW HP2 Enduro Specs (Top Speed | Horsepower | Weight)

The BMW HP2 Enduro motorcycle specifications include a 1,170 cc (71.39 cu in) engine, power of 103.3 hp (75.4 kW) @ 7,000 rpm, a 6-speed gearbox, and a listed weight of 195 kg (429.9 lb).

Key specifications

2006-2008Model years
1,170 ccDisplacement
103.3 hpPower
115.0 Nm @ 5,500 rpmTorque
195 kgWet weight
920 mmSeat height
13 LFuel tank
1,610 mmWheelbase
Model years covered
200620072008
Year-specific specification changes

The 2006 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Displacement
20071,130 cc (68.95 cu in)
Engine type
2007Two cylinder boxer, four-stroke
2008Two cylinder boxer, two-stroke
Front brakes
20072008Single disc
Front suspension
200745 mm UPSD fork
2008WAD upside-down front fork, Ø 45 mm, compression damping continuously adjustable in two ranges, rebound damping adjustable
Front tire
200790/90-S21
Fuel system
2007Injection. Electronic fuel injection
2008Injection. Electronic intake pipe injection/BMS-K digital engine management with overrun fuel cut-off, twin-spark ignition
Power
2007105 hp (76.6 kW) @ 7,000 rpm
Rear brakes
20072008Single disc
Rear suspension
2007EVO Paralever
Rear tire
2007140/80-S17
Wheelbase
20081,625 mm (64.0 inches)
Clutch
2007Hydraulic, dry, single-disk
2008Single dry plate clutch, hydraulically operated
Fuel consumption
20075.50 L/100 km (18.2 km/l or 42.77 mpg)
Greenhouse gases
2007127.6 CO 2 g/km. (CO2 – Carbon dioxide emission)
Power/weight ratio
20070.6000 hp/kg
Rake
200832.5°
Trail
2008157 mm (6.2 inches)
Valves per cylinder
20072

How the BMW HP2 Enduro compares

This compares the motorcycle with all BMW models in this specifications database. The blue marker is this model and the grey line is the BMW database average.

Engine power103.3 hp
Low 12 hpAverage 81.6 hpHigh 193 hp

About 27% higher than the BMW database average. Around the 71st percentile across BMW models.

Displacement1,170 cc
Low 247 ccAverage 909 ccHigh 1,649 cc

About 29% higher than the BMW database average. Around the 87th percentile across BMW models.

Wet weight195 kg
Low 130 kgAverage 226.7 kgHigh 364 kg

About 14% lighter than the BMW database average. Around the 20th percentile across BMW models.

Seat height920 mm
Low 710 mmAverage 809 mmHigh 910 mm

About 14% taller than the BMW database average. Around the 99th percentile across BMW models.

Fuel capacity13 L
Low 9.8 LAverage 19.2 LHigh 30 L

About 32% smaller than the BMW database average. Around the 9th percentile across BMW models.

This model BMW database average

Mechanical overview

Engine layout snapshot

Twin, four-stroke • 1,170 cc • Oil & air cooled • 103.3 hp
Chassis snapshot

Wheelbase 1,610 mmSeat 920 mm
6-speed • Shaft drive (cardan) (final drive) • 90/90-21 front / 140/80-17 rear

Additional useful specifications

Front tire size 90/90-21
Rear tire size 140/80-17
Front tire width 90 mm
Front tire aspect ratio 90%
Front rim diameter 21 in
Rear tire width 140 mm
Rear tire aspect ratio 80%
Rear rim diameter 17 in
Estimated theoretical fuel range 317 km
Power-to-weight ratio 0.530 hp/kg
Power-to-weight 529.7 hp/tonne
Specific power 88.3 hp/L
Bore/stroke ratio 1.38:1 (Oversquare)

Model information

Category Enduro / offroad

Engine specifications

Engine type Twin, four-stroke
Displacement 1,170 cc (71.39 cu in)
Power 103.3 hp (75.4 kW) @ 7,000 rpm
Torque 115.0 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 5,500 rpm
Bore × stroke 101.0 x 73 mm (4.0 x 2.9 inches)
Compression ratio 11.0:1
Valves per cylinder 4
Cooling system Oil & air
Fuel system Injection. Electronic intake pipe injection/digital engine management: BMS-K with overrun fuel cut-off, dual ignition
Fuel control Single Overhead Cams (SOHC)

Transmission and drivetrain

Gearbox 6-speed
Final drive Shaft drive (cardan) (final drive)
Clutch Single-disc dry clutch, hydraulically operated

Chassis and suspension

Frame Tubular steel space frame
Front suspension WAD upside-down front fork, Ø 45 mm , compression damping adjustable in two ranges, rebound damping adjustable
Rear suspension Forged aluminium single-sided swinging arm with BMW Motorrad Paralever
Front wheel travel 270 mm (10.6 inches)
Rear wheel travel 250 mm (9.8 inches)
Rake 29.5°
Trail 127 mm (5.0 inches)

Brakes, wheels and tires

Front brakes Double disc
Rear brakes Double disc
Front tire 90/90-21
Rear tire 140/80-17

Dimensions and weight

Wet weight 195 kg (429.9 lb)
Dry weight 175 kg (385.8 lb)
Seat height 920 mm (36.2 inches)
Overall length 2,350 mm (92.5 inches)
Overall width 880 mm (34.6 inches)
Overall height 1,266 mm (49.8 inches)
Wheelbase 1,610 mm (63.4 inches)

Fuel and emissions

Fuel capacity 13.00 L (3.43 US gal)
Fuel consumption 4.10 L/100 km (24.4 km/l or 57.37 mpg)
Greenhouse gases 95.1 CO 2 g/km. (CO2 – Carbon dioxide emission)

Performance

Power/weight ratio 0.5900 hp/kg

Other specifications

Comments Boxer engine

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from BMW models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official BMW information before relying on them. Visit the official BMW website.