The Kawasaki Ninja H2 SX motorcycle specifications include a 998 cc (60.90 cu in) engine, a 6-speed gearbox, and a listed weight of 256 kg (564.4 lb).
Key specifications
The 2018 model is treated as the standard specification. Only later model years with a different supplied value are shown below.
How the Kawasaki Ninja H2 SX compares
This compares the motorcycle with all Kawasaki models in this specifications database. The blue marker is this model and the grey line is the Kawasaki database average.
About 45% higher than the Kawasaki database average. Around the 80th percentile across Kawasaki models.
About 23% heavier than the Kawasaki database average. Around the 76th percentile across Kawasaki models.
Very close to the Kawasaki database average. Around the 75th percentile across Kawasaki models.
About 24% larger than the Kawasaki database average. Around the 75th percentile across Kawasaki models.
Mechanical overview
Additional useful specifications
| Front tire size | 120/70-ZR17 |
|---|---|
| Rear tire size | 190/55-ZR17 |
| Estimated theoretical fuel range | 247 km |
| Bore/stroke ratio | 1.38:1 (Oversquare) |
Engine specifications
| Engine type | In-line four, four-stroke |
|---|---|
| Displacement | 998 cc (60.90 cu in) |
| Torque | 137.3 Nm (14.0 kgf-m or 101.3 ft.lbs) @ 9,500 rpm |
| Bore × stroke | 76.0 x 55 mm (3.0 x 2.2 inches) |
| Compression ratio | 11.2:1 |
| Valves per cylinder | 4 |
| Cooling system | Liquid |
| Fuel system | Injection. 40 mm x 4 with dual injection |
| Fuel control | Double Overhead Cams/Twin Cam (DOHC) |
| Ignition | Digital |
| Starter | Electric |
| Lubrication | Forced lubrication, wet sump with oil cooler |
Transmission and drivetrain
| Gearbox | 6-speed |
|---|---|
| Final drive | Chain (final drive) |
| Clutch | Wet multi-disc, manual |
Chassis and suspension
| Frame | Trellis, high-tensile steel with Swingarm Mounting Plate |
|---|---|
| Front suspension | 43 mm inverted fork with rebound and compression damping, spring preload adjustability and top-out springs |
| Rear suspension | Uni-Trak, gas-charged shock with piggyback reservoir, compression damping, rebound damping, remote spring preload adjustability and top-out spring |
| Front wheel travel | 120 mm (4.7 inches) |
| Rear wheel travel | 139 mm (5.5 inches) |
| Rake | 27.0° |
| Trail | 103 mm (4.1 inches) |
Brakes, wheels and tires
| Front brakes | Double disc. Floating discs. |
|---|---|
| Rear brakes | Single disc |
| Front tire | 120/70-ZR17 |
| Rear tire | 190/55-ZR17 |
Dimensions and weight
| Wet weight | 256 kg (564.4 lb) |
|---|---|
| Seat height | 835 mm (32.9 inches) |
| Overall length | 2,135 mm (84.1 inches) |
| Overall width | 775 mm (30.5 inches) |
| Overall height | 1,205 mm (47.4 inches) |
| Wheelbase | 1,480 mm (58.3 inches) |
| Ground clearance | 130 mm (5.1 inches) |
Fuel and emissions
| Fuel capacity | 19.00 L (5.02 US gal) |
|---|---|
| Fuel consumption | 7.70 L/100 km (13.0 km/l or 30.55 mpg) |
| Greenhouse gases | 178.6 CO 2 g/km. (CO2 – Carbon dioxide emission) |
Other specifications
| Color options | Metallic Carbon Gray/Metallic Matte Carbon Gray Metallic Carbon Gray |
|---|---|
| Factory warranty | 12 month Limited Warranty |
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Kawasaki models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Kawasaki information before relying on them. Visit the official Kawasaki website.