The KTM 250 EXC TPI Six Days motorcycle specifications include a 249 cc (15.19 cu in) engine, a 6-speed gearbox, and a listed weight of 103.5 kg (228.2 lb).
Key specifications
The 2018 model is treated as the standard specification. Only later model years with a different supplied value are shown below.
How the KTM 250 EXC TPI Six Days compares
This compares the motorcycle with all KTM models in this specifications database. The blue marker is this model and the grey line is the KTM database average.
About 44% lower than the KTM database average. Around the 35th percentile across KTM models.
About 7% taller than the KTM database average. Around the 85th percentile across KTM models.
About 15% smaller than the KTM database average. Around the 48th percentile across KTM models.
KTM database percentile rankings
Percentiles show where this motorcycle sits across the KTM specifications database. They are descriptive database rankings, not performance ratings.
249 cc — larger displacement than about 35% of KTM models.
960 mm — taller than about 85% of KTM models.
9 L — larger than about 48% of KTM fuel tanks in this database.
Dimensions compared with KTM average
Each measurement is compared with the average value across KTM models where that dimension is available.
1,482
1,436
3% above average.
960
895
7% above average.
370
304
22% above average.
Mechanical overview
Additional useful specifications
| Bore/stroke ratio | 0.92:1 (Undersquare) |
|---|
Model information
| Category | Enduro / offroad |
|---|
Engine specifications
| Engine type | Single cylinder, two-stroke |
|---|---|
| Displacement | 249 cc (15.19 cu in) |
| Bore × stroke | 66.4 x 72 mm (2.6 x 2.8 inches) |
| Cooling system | Liquid |
| Fuel system | Injection |
| Ignition | Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment, type Kokusan |
| Starter | Electric & kick |
Transmission and drivetrain
| Gearbox | 6-speed |
|---|---|
| Final drive | Chain (final drive) |
| Clutch | Wet, DDS multi-disc clutch, Brembo hydraulics |
Chassis and suspension
| Frame | Chrome-molybdenum steel central-tube |
|---|---|
| Front suspension | WP-USD Xplor 48 with preload adjuster |
| Rear suspension | WP Xplor PDS shock absorber |
| Front wheel travel | 300 mm (11.8 inches) |
| Rear wheel travel | 310 mm (12.2 inches) |
| Rake | 26.5° |
Brakes, wheels and tires
| Front brakes | Single disc. Brake calipers on floating bearings |
|---|---|
| Rear brakes | Single disc. Brake calipers on floating bearings |
Dimensions and weight
| Dry weight | 103.5 kg (228.2 lb) |
|---|---|
| Seat height | 960 mm (37.8 inches) |
| Wheelbase | 1,482 mm (58.3 inches) |
| Ground clearance | 370 mm (14.6 inches) |
Fuel and emissions
| Fuel capacity | 9.00 L (2.38 US gal) |
|---|
Other specifications
| Color options | Orange/white/red/blue |
|---|
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from KTM models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official KTM information before relying on them. Visit the official KTM website.