The Honda Stateline ABS motorcycle specifications include a 1,312 cc (80.06 cu in) engine, a 5-speed gearbox, and a listed weight of 307.5 kg (678 lb).
Key specifications
The 2010 model is treated as the standard specification. Only later model years with a different supplied value are shown below.
How the Honda Stateline ABS compares
This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.
About 133% higher than the Honda database average. Around the 95th percentile across Honda models.
About 56% heavier than the Honda database average. Around the 91st percentile across Honda models.
About 13% lower than the Honda database average. Around the 10th percentile across Honda models.
About 24% larger than the Honda database average. Around the 67th percentile across Honda models.
Honda database percentile rankings
Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.
1,312 cc — larger displacement than about 95% of Honda models.
307.5 kg — heavier than about 91% of Honda models, or lighter than about 9%.
678 mm — taller than about 10% of Honda models.
16.6 L — larger than about 67% of Honda fuel tanks in this database.
Dimensions compared with Honda average
Each measurement is compared with the average value across Honda models where that dimension is available.
1,781
1,431
25% above average.
678
780
13% below average.
Mechanical overview
Additional useful specifications
| Front tire size | 140/80-17 |
|---|---|
| Rear tire size | 170/80-15 |
| Front tire width | 140 mm |
| Front tire aspect ratio | 80% |
| Front rim diameter | 17 in |
| Rear tire width | 170 mm |
| Rear tire aspect ratio | 80% |
| Rear rim diameter | 15 in |
| Bore/stroke ratio | 0.86:1 (Undersquare) |
Engine specifications
| Engine type | V2, four-stroke |
|---|---|
| Displacement | 1,312 cc (80.06 cu in) |
| Bore × stroke | 89.5 x 104.3 mm (3.5 x 4.1 inches) |
| Compression ratio | 9.2:1 |
| Valves per cylinder | 3 |
| Cooling system | Liquid |
| Fuel system | Injection. PGM-FI with automatic enrichment circuit, one 38mm throttle body |
| Fuel control | Single Overhead Cams (SOHC) |
| Ignition | Digital with 3-D mapping, two spark plugs per cylinder |
| Starter | Electric |
Transmission and drivetrain
| Gearbox | 5-speed |
|---|---|
| Final drive | Shaft drive (cardan) (final drive) |
Chassis and suspension
| Front suspension | 41mm fork; 4.0 inches travel |
|---|---|
| Rear suspension | Single shock; 3.9 inches travel |
| Rake | 33.0° |
| Trail | 118 mm (4.6 inches) |
Brakes, wheels and tires
| Front brakes | Single disc. ABS. 2-piston caliper |
|---|---|
| Rear brakes | Single disc. ABS. Single piston |
| Front tire | 140/80-17 |
| Rear tire | 170/80-15 |
Dimensions and weight
| Wet weight | 307.5 kg (678 lb) |
|---|---|
| Seat height | 678 mm (26.7 inches) |
| Wheelbase | 1,781 mm (70.1 inches) |
Fuel and emissions
| Fuel capacity | 16.65 L (4.40 US gal) |
|---|
Other specifications
| Color options | Candy Dark Red |
|---|---|
| Price as new | US$ 12699. MSRP depends on country, taxes, accessories, etc. |
| Comments | Model ID: VT1300CRA. |
Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.