Honda NT700V Deauville Specs (Top Speed | Horsepower | Weight)

The Honda NT700V Deauville motorcycle specifications include a 680.2 cc (41.51 cu in) engine, a 5-speed gearbox, and a listed weight of 236 kg (520.3 lb).

Key specifications

2007-2009Model years
680 ccDisplacement
66.2 Nm @ 6,500 rpmTorque
236 kgDry weight
805 mmSeat height
19.7 LFuel tank
1,476 mmWheelbase
156 mmGround clearance
Model years covered
200720082009
Year-specific specification changes

The 2007 model is treated as the standard specification. Only later model years with a different supplied value are shown below.

Rear brakes
20082009Single disc
Power/weight ratio
200820090.2744 hp/kg

How the Honda NT700V Deauville compares

This compares the motorcycle with all Honda models in this specifications database. The blue marker is this model and the grey line is the Honda database average.

Displacement680 cc
Low 49 ccAverage 563 ccHigh 1,832 cc

About 21% higher than the Honda database average. Around the 69th percentile across Honda models.

Seat height805 mm
Low 650 mmAverage 780 mmHigh 960 mm

Very close to the Honda database average. Around the 69th percentile across Honda models.

Fuel capacity19.7 L
Low 3.7 LAverage 13.5 LHigh 25 L

About 46% larger than the Honda database average. Around the 85th percentile across Honda models.

This model Honda database average

Honda database percentile rankings

Percentiles show where this motorcycle sits across the Honda specifications database. They are descriptive database rankings, not performance ratings.

Displacement69th

680 cc — larger displacement than about 69% of Honda models.

Seat height69th

805 mm — taller than about 69% of Honda models.

Fuel capacity85th

19.7 L — larger than about 85% of Honda fuel tanks in this database.

Dimensions compared with Honda average

Each measurement is compared with the average value across Honda models where that dimension is available.

Overall length2,218 mm
This bike

2,218

Honda avg

2,078

7% above average.

Wheelbase1,476 mm
This bike

1,476

Honda avg

1,431

3% above average.

Seat height805 mm
This bike

805

Honda avg

780

3% above average.

Ground clearance156 mm
This bike

156

Honda avg

184

15% below average.

Mechanical overview

Engine layout snapshot

V2, four-stroke • 680 cc • Liquid cooled
Chassis snapshot

Wheelbase 1,476 mmSeat 805 mmClearance 156 mm
5-speed • Shaft drive (cardan) (final drive)

Additional useful specifications

Bore/stroke ratio 1.23:1 (Oversquare)

Engine specifications

Engine type V2, four-stroke
Displacement 680.2 cc (41.51 cu in)
Torque 66.2 Nm (6.8 kgf-m or 48.8 ft.lbs) @ 6,500 rpm
Bore × stroke 81.0 x 66 mm (3.2 x 2.6 inches)
Compression ratio 10.0:1
Cooling system Liquid
Fuel system Injection. PGM-FI electronic fuel injection
Fuel control Single Overhead Cams (SOHC)
Ignition Digital transistorised with electronic advance
Starter Electric

Transmission and drivetrain

Gearbox 5-speed
Final drive Shaft drive (cardan) (final drive)

Chassis and suspension

Front suspension 41 mm telescopic fork, 115 mm axle travel
Rear suspension Single damper with adjustable preload, 122.5 mm axle travel

Brakes, wheels and tires

Front brakes Double disc
Rear brakes Double disc

Dimensions and weight

Dry weight 236 kg (520.3 lb)
Seat height 805 mm (31.7 inches)
Overall length 2,218 mm (87.3 inches)
Wheelbase 1,476 mm (58.1 inches)
Ground clearance 156 mm (6.1 inches)

Fuel and emissions

Fuel capacity 19.70 L (5.20 US gal)

Performance

Power/weight ratio 0.4576 hp/kg

Other specifications

Comments Also available with ABS brakes.

Disclaimer: Specifications may vary by market, trim, production date and optional equipment, and scraped or historical data can contain errors. Comparison and percentile values are calculated from Honda models in this specifications database. Always double-check important specifications against the motorcycle owner’s/service manual and official Honda information before relying on them. Visit the official Honda website.